PDF | 8 MB - Australian Building Codes Board

More documents

Recommendations

Info

Australian Building Codes Board Page 1 PART A2 ACCEPTANCE OF DESIGN AND CONSTRUCTION A2.1 Suitability of materials Every part of a building must be constructed in an appropriate manner to achieve the requirements of the BCA, using materials that are fit for the purpose for which they are intended. A2.2 Evidence of suitability (a) (b) Subject to A2.3 and A2.4, evidence to support that the use of a material, form of construction or design meets a Performance Requirement or a Deemed-to-Satisfy Provision may be in the form of one or a combination of the following: (i) (ii) (iii) (iv) A report issued by a Registered Testing Authority, showing that the material or form of construction has been submitted to the tests listed in the report, and setting out the results of those tests and any other relevant information that demonstrates its suitability for use in the building. A current Certificate of Conformity or a current Certificate of Accreditation. A certificate from a professional engineer or other appropriately qualified person which— (A) (B) certifies that a material, design, or form of construction complies with the requirements of the BCA; and sets out the basis on which it is given and the extent to which relevant specifications, rules, codes of practice or other publications have been relied upon. A current certificate issued by a product certification body that has been accredited by the Joint Accreditation System of Australia and New Zealand (JAS-ANZ). (v) * * * * * (vi) Any other form of documentary evidence that correctly describes the properties and performance of the material, or form of construction and adequately demonstrates its suitability for use in the building. Evidence to support that a calculation method complies with an ABCB protocol may be in the form of one or a combination of the following: (i) A certificate from a professional engineer or other appropriately qualified person which— (A) (B) PUBLIC COMMENT DRAFT certifies that the calculation method complies with a relevant ABCB protocol; and sets out the basis on which it is given and the extent to which relevant specifications, rules, codes of practice and other publications have been relied upon. NCC2014 Volume One A2.2
Page 4 Australian Building Codes Board No. Date Title BCA Clause(s) AS 1657 1992 Fixed platforms, walkways, stairways and D1.16, ladders — Design, construction and D2.18, H1.6 installation (SAA Code for Fixed Platforms, Walkways, Stairways and Ladders) AS/NZS 1664 AS/NZS 1668 AS 1668 AS 1668 AS 1670 Aluminium structures Part 1 1997 Limit state design B1.4 Amdt 1 Part 2 1997 Allowable stress design B1.4 Amdt 1 The use of ventilation and airconditioning in buildings Part 1 1998 Fire and smoke control in multi- C2.12, compartment buildings C3.15, Spec C2.5, D1.7, Spec E1.8, E2.2, Spec E2.2a, F4.12, Spec G3.8 Amdt 1 The use of mechanical ventilation and air-conditioning in buildings Part 2 1991 Mechanical ventilation for acceptable F4.5, F4.11, indoor-air quality F4.12, J5.2 The use of ventilation and airconditioning in buildings Part 2 2012 Mechanical ventilation in buildings F4.5, F4.11, F4.12, J5.2 Fire detection, warning, control and intercom systems — Systems design, installation and commissioning Part 1 2004 Fire C3.5, C3.6, Amdt 1 C3.7, C3.8, C3.11, D2.21, G4.8, Spec C3.4, Spec E2.2a, Spec G3.8 PUBLIC COMMENT DRAFT Part 3 2004 Fire alarm monitoring Spec E2.2a Spec A1.3 – 1. NCC2014 Volume One
Page 1 and 2: Page 2 Australian Building Codes Bo
Page 3 and 4: Australian Building Codes Board Pag
Page 5: Page 18 Australian Building Codes B
Page 15 and 16: Page 2 (ii) (iii) area of the build
Page 17 and 18: (b) (c) Australian Building Codes B
Page 19 and 20: Page 4 (iv) Australian Building Cod
Page 21 and 22: (b) (ii) Australian Building Codes
Page 23 and 24: E1.4 Fire hose reels (a) (b) (c) (d
Page 27 and 28: Page 10 Australian Building Codes B
Page 29 and 30: (b) Australian Building Codes Board
Page 39 and 40: Page 16 Australian Building Codes B
Page 57 and 58:
Australian Building Codes Board Pag
Page 59 and 60:
Page 61 and 62:
Page 63 and 64:
Page 65 and 66:
Page 67 and 68:
Safety measure Australian Building
Page 69 and 70:
Page 71 and 72:
Page 73 and 74:
Page 2 Australian Building Codes Bo
Page 75 and 76:
Page 77 and 78:
(e) (f) (g) (iii) (Y) (Z) Australia
Page 79 and 80:
Page 81 and 82:
Table J2.4a ENERGY INDEX Applicatio
Page 83 and 84:
Page 10 Australian Building Codes B
Page 85 and 86:
Page 87 and 88:
Page 89 and 90:
Page 91 and 92:
Page 93 and 94:
Page 95 and 96:
Page 97 and 98:
Reference Section B B1.4(i)(ii)(C)
Page 99:
Reference FV5.3 Australian Building
show all

PDF | 8 MB - Australian Building Codes Board

Create successful ePaper yourself

Delete template?

Save as template?