PDF | 8 MB - Australian Building Codes Board

More documents

Recommendations

Info

Australian Building Codes Board Page 1 PART J8 ACCESS FOR MAINTENANCE AND FACILITIES FOR MONITORING Deemed-to-Satisfy Provisions J8.0 Deemed-to-Satisfy Provisions (a) (b) Where a Building Solution is proposed to comply with the Deemed-to-Satisfy Provisions, Performance RequirementJP2 is satisfied by complying with J8.1 to J8.3. Where a Building Solution is proposed as an Alternative Solution to the Deemed-to- Satisfy Provisions of J8.1 to J8.3, the relevant Performance Requirements must be determined in accordance with A0.10. J8.1 Application of Part The Deemed-to-Satisfy Provisions of this Part do not apply— (a) (b) within a sole-occupancy unit of a Class 2 building or a Class 4 part of a building; or to a Class 8 electricity network substation. J8.2 Access for maintenance NSW J8.2 Access for maintenance must be provided to components of services that rely on maintenance to continue to perform to a standard of energy efficiency not less than they were originally required to achieve.must be provided to all plant, equipment and components that require maintenance in accordance with Part I2. J8.3 Facilities for energy monitoring (a) (b) (c) A building or sole-occupancy unit with a floor area of more than 500 m 2 must have the facility to record the consumption of gas and electricity. A building with a floor area of more than 2,500 m 2 must have the facility to record individually the energy consumption of— (i) (ii) (iii) (iv) (v) (vi) air-conditioning plant including, where appropriate, heating plant, cooling plant and air handling fans; and artificial lighting; and appliance power; and central hot water supply; and internal transport devices including lifts, escalators and travelators where there is more than one serving the building; and other ancillary plant. PUBLIC COMMENT DRAFT The provisions of (b) do not apply to a Class 2 building with a floor area of more NCC2014 Volume One J8.3
Australian Building Codes Board Page 15 Deemed-to-Satisfy Provisions (i) External wall construction description Item Item description R-Value Opaque glazed construction within a metal frame – 10 mm internal plaster on battens 1. Outdoor air film (7 m/s) 0.04 or furring channels Clear or opaque glass (10 2. 0.01 mm, 2500 kg/m 3 ) Airspace (20 mm to 40 3. mm non-reflective and 0.17 unventilated) Steel sheet (1 mm to 3 4. 0.00 mm, 7850 kg/m 3 ) Airspace (2 mm to 100 5. mm non-reflective and 0.17 unventilated) Plasterboard, gypsum 6. 0.06 (10 mm, 880 kg/m 3 ) 7. Indoor air film (still air) 0.12 Total R-Value 0.57 PUBLIC COMMENT DRAFT NCC2014 Volume One Spec J1.5 – 2.
Page 1 and 2:
Page 2 Australian Building Codes Bo
Page 3 and 4:
Australian Building Codes Board Pag
Page 5 and 6:
Page 18 Australian Building Codes B
Page 7 and 8:
Page 9 and 10:
Page 11 and 12:
Page 13 and 14:
Page 15 and 16:
Page 2 (ii) (iii) area of the build
Page 17 and 18:
(b) (c) Australian Building Codes B
Page 19 and 20:
Page 4 (iv) Australian Building Cod
Page 21 and 22:
(b) (ii) Australian Building Codes
Page 23 and 24:
E1.4 Fire hose reels (a) (b) (c) (d
Page 25 and 26:
Page 27 and 28:
Page 10 Australian Building Codes B
Page 29 and 30:
(b) Australian Building Codes Board
Page 31 and 32:
Page 33 and 34:
Page 35 and 36:
Page 37 and 38:
Page 39 and 40: Page 16 Australian Building Codes B
Page 41 and 42: Page 2 Australian Building Codes Bo
Page 53 and 54: Australian Building Codes Board Pag
Page 67 and 68: Safety measure Australian Building
Page 77 and 78: (e) (f) (g) (iii) (Y) (Z) Australia
Page 81 and 82: Table J2.4a ENERGY INDEX Applicatio
Page 83 and 84: Page 10 Australian Building Codes B
Page 89: Page 2 Australian Building Codes Bo
Page 97 and 98: Reference Section B B1.4(i)(ii)(C)
Page 99: Reference FV5.3 Australian Building
show all

PDF | 8 MB - Australian Building Codes Board

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?