PDF | 8 MB - Australian Building Codes Board

More documents

Recommendations

Info

Page 16 Australian Building Codes Board Deemed-to-Satisfy Provisions L n,w + R w + C R C w I tr (not (not Description (not Construction less less more than) than) than) Concrete or terracotta tiles with— (a) (b) 165 mm thick glass or mineral wool insulation with a density of 7 kg/m 3 or 165 mm thick polyester insulation with a density of 14 kg/m 3 positioned between ceiling joists; and two layers of 13 mm ceiling plasterboard on resilient mounts and furring channels. 45 - - Table 5 ACCEPTABLE FORMS OF CONSTRUCTION FOR A WINDOW Glazing system R w + C tr (not less than) Sliding or awning window Standard seal for an opening frame Acoustic seal for an opening frame Fixed window Single 4 mm to 6 mm monolithic glass pane sealed 22 25 25 into a frame Single 6.38 mm to 10.38 mm laminated glass pane 28 31 31 sealed into a frame Double 4 mm to 6.38 mm glass panes sealed into a 28 31 31 frame with a 6 mm to 12 mm gap Table 6 ACCEPTABLE FORMS OF CONSTRUCTION FOR AN EXTERNAL DOOR OTHER THAN A WINDOW PUBLIC COMMENT DRAFT Description R w + C tr (not less than) 40 mm solid core door 30 45 mm solid core door 35 50 mm solid core door 40 Spec F5.2 – 2. NCC2014 Volume One
Australian Building Codes Board Page 1 PART I1 EQUIPMENT AND SAFETY INSTALLATIONS* * * * * This Part has deliberately been left blank. OBJECTIVE IO1 The Objective of this Part is to ensure that people are protected from illness, injury and loss of amenity throughout the life of the building. FUNCTIONAL STATEMENT IF1.1 Equipment and safety installations in a building are to safeguard people from illness or injury and prevent the loss of amenity. PERFORMANCE REQUIREMENT IP1.1 Safety measures must be capable of performing to a standard no less than that which they were originally required to achieve. IP1.2 Mechanical ventilation and hot water, warm water and cooling water systems must be adequately maintained to safeguard people from illness or injury. PUBLIC COMMENT DRAFT NCC2014 Volume One IP1.2
Page 1 and 2:
Page 2 Australian Building Codes Bo
Page 3 and 4:
Australian Building Codes Board Pag
Page 5 and 6:
Page 18 Australian Building Codes B
Page 7 and 8:
Page 4 Australian Building Codes Bo
Page 9 and 10:
Page 11 and 12:
Page 13 and 14: Page 8 Australian Building Codes Bo
Page 15 and 16: Page 2 (ii) (iii) area of the build
Page 17 and 18: (b) (c) Australian Building Codes B
Page 19 and 20: Page 4 (iv) Australian Building Cod
Page 21 and 22: (b) (ii) Australian Building Codes
Page 23 and 24: E1.4 Fire hose reels (a) (b) (c) (d
Page 27 and 28: Page 10 Australian Building Codes B
Page 29 and 30: (b) Australian Building Codes Board
Page 35 and 36: Australian Building Codes Board Pag
Page 63: Australian Building Codes Board Pag
Page 67 and 68: Safety measure Australian Building
Page 77 and 78: (e) (f) (g) (iii) (Y) (Z) Australia
Page 81 and 82: Table J2.4a ENERGY INDEX Applicatio
Page 97 and 98: Reference Section B B1.4(i)(ii)(C)
Page 99: Reference FV5.3 Australian Building
show all

PDF | 8 MB - Australian Building Codes Board

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?