Jabra PRO 9460/9470 User Manual - Comfort Telecommunications ...
Jabra PRO 9460/9470 User Manual - Comfort Telecommunications ...
Jabra PRO 9460/9470 User Manual - Comfort Telecommunications ...
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
7.2<br />
Attaching or detaching a Wearing Style<br />
Note: <strong>Jabra</strong> <strong>PRO</strong> <strong>9460</strong>-Duo headset is always worn as a headband.<br />
Attaching the headband<br />
1. Align the mounting surface of the headset with matching socket on the headband attachment.<br />
2. Press the headset assembly firmly onto the outer side of the headband attachment until it clicks into place<br />
(snap-to-click). If you have trouble pressing them together, try to rotate the boom arm about 300 and try<br />
again. Refer to the figure in the section 4.3: “Assemble the Headset” earlier in this manual.<br />
3. Rotate the headset boom arm for left- or right-ear use as needed. Always position the microphone so that it<br />
sits as close to the corner of your mouth as possible when you wear the headset.<br />
4. Adjust the length of the headband to fit snugly around your head.<br />
See also Section 7.1: How to Wear the Headset for illustrations.<br />
Detaching the headband<br />
1. Hold the assembly firmly in both hands, with the headset in one hand and the ear-cushion assembly of the<br />
wearing-style attachment in the other.<br />
2. Gently pull the headset away from the headband attachment until it comes free. If you have trouble pulling<br />
them apart, try to rotate the boom arm about 300 and try again.<br />
english<br />
Figure 28: Detaching a wearing-style attachment from the headset<br />
Attaching the ear hook<br />
Note: The ear hook is delivered pre-assembled for wearing on your right ear with the medium sized<br />
earbud mounted.<br />
1. Decide whether you want to wear the ear hook on the left or right ear — you might need to pull out the hook<br />
itself from its attachment, rotate it 180 degrees and then push it back in to change left/right orientation. Left<br />
and right assemblies are shown on the previous page in the figure “Assembling and wearing the <strong>Jabra</strong> <strong>PRO</strong><br />
headset in various styles”:<br />
The point at which the hook is attached — marked with the text “<strong>Jabra</strong>” — must always be in front of the hook<br />
itself.<br />
2. Try placing the ear hook with an earbud mounted in your ear. If it does not fit snugly in your ear, pull the<br />
earbud off the attachment and put on another size (small, medium and large earbuds are delivered as<br />
standard.)<br />
<strong>Jabra</strong> <strong>PRO</strong> <strong>9460</strong>, <strong>9460</strong>-Duo and <strong>9470</strong> <strong>User</strong> manual<br />
33