Jabra PRO 9460/9470 User Manual - Comfort Telecommunications ...

Headset Signal Tones
The headset uses a variety of soft tones to alert you to events such as an incoming call, multifunction button
presses, volume changes, and more. These enable you to keep track of what is going on while you are wearing
the headset.
State or event
Button tap
Tone description
A quick medium tone
Sample
(click to play)
english
Button double-tap
Button press
Turn volume up
Maximum volume reached
Turn volume down
Minimum volume reached
Mute
Incoming desk phone call
Incoming softphone call
Incoming mobile phone call
Target changed to desk phone
Target changed to softphone
Target changed to mobile phone
Call ended
Battery low
Calls on hold via call waiting
Pairing succeeded
Error (such as pairing failed)
Two button-tap tones
The button-tap tone followed by a longer tone
A short, high tone that indicates the new volume
Two short, high notes
A short, low tone that indicates the new volume
Two short, low notes
A quick medium tone, rest and quick low tone;
repeats occasionally
A very fast, high-pitch melody
A very fast, medium-pitch melody
A very fast, low-pitch melody
A slow, high melody; or a human voice announcing
“desk phone” in English
A slow, medium melody; or a human voice
announcing “softphone” in English
A slow, deep melody; or a human voice announcing
“mobile phone” in English
A quick melody ending on a low note
Two very quick, low tones; repeats occasionally
Two slow medium-pitch notes, a long rest, and
then two more; repeats occasionally
Three slow tones ending on a medium-high note
Three quick tones followed by a lower long tone
Table 5: Headset signal tones and their meanings
Jabra PRO 9460, 9460-Duo and 9470 User manual
37