Jabra PRO 9460/9470 User Manual - Comfort Telecommunications ...

9.3
Forcing reconnection/Disconnection via the touchscreen
If the base — and therefore also the headset — loses the connection to the mobile phone (e.g. if you take it
out of range) it periodically attempts to reconnect — every 15 secs for the first 3 hours and then every 40 secs
indefinitely. You can instead force the headset to reconnect with it via the touchscreen base. The headset must be
within range of the base for this to happen.
Consider the figure below:
english
Figure 43: Mobile phone connection is lost
The mobile phone icon is greyed out, indicating that the connection is lost. To reconnect manually, do the
following:
1. Touch the greyed out mobile phone icon to make it the target. See the figure below:
Figure 44: Mobile phone is the target
2. Touch the Bluetooth button on the mobile phone icon. This causes the base to start reconnecting to the
mobile phone, indicated by the flashing Bluetooth icon. See the figure below:
Figure 45: Mobile phone is the target
Jabra PRO 9460, 9460-Duo and 9470 User manual
54