Safety & Health in the Stone Crushing Industry - Occupational ...

68
2.3
2.4
2.5
2.6
2.7
2.8
2.10
2.11
2.12
2.13
2.14
2.15
2.16
Are all cable trenches covered properly and
cables in cable trays secured properly?
Are all connections and electrical devices
grounded?
Are there fire extinguishers and rubber mats
close to important electrical installations?
Are there bare and raw wires inserted directly
into sockets?
Are MCB/ELCBs provided for protecting the
operator from electrical hazards?
Is the main switch box in good condition,
protected from weather, and provided with an
ELCB?
Are all distribution boxes marked legibly in an
understandable language marking the feeding
point, voltage, and identification number?
Are electrical conductors such as cables of
sufficient size and load carrying capacity?
Are there interlocks and a lockout-tagout
system in place for electrical equipment during
repair?
Do workers who do electrical work wear the
necessary PPE, like shoes and gloves and are
equipped with approved rubber mats?
During electrical maintenance, a lockout/tagout
system is the mandatory and workers are
trained to follow these instructions
The transformer where the incoming electricity
supply is received is isolated and fenced off; its
compound is clean from vegetation to prevent
fire. The transformers are positioned at least
2.50 meters above ground level.
Electrical cables are laid into the ground in
shock-proof material. Cables should be run in
extra plastic conduits
MAXIMUM POSSIBLE SCORE: 26
ACHIEVED SCORE: ………………..
Notes: