Administration - Siemens Enterprise Communications
Administration - Siemens Enterprise Communications
Administration - Siemens Enterprise Communications
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
120<br />
Mailbox (on / off)<br />
When the mailbox is switched off, no greeting is played back and no messages<br />
are recorded. If this station is now called, the telephone rings without<br />
call pickup by an answer machine.<br />
Recording of calls (on / off)<br />
If recording is switched off for a mailbox, the answer machine can pick up<br />
the call at the end of the auto answer time. The selected greeting is played<br />
back, followed by a message indicating that message recording is not possible.<br />
Time until auto answer<br />
You can set an auto answer time of between 0 and 59 seconds. During<br />
this time the telephone rings and the mailbox for the station is then activated.<br />
The time set should be greater than 3 seconds. In the case of times that<br />
lie below this limit, the mailbox may pick up calls immediately without a<br />
call being signaled.<br />
Message length<br />
The maximum length of a message can be restricted on the basis of the<br />
limited recording duration. A time of between 1 and 5 minutes can be set<br />
here. A length of 2 minutes is set by default.<br />
Redirection to intercept position<br />
If the user presses the d key during the greeting or message recording,<br />
the mailbox attempts to call the intercept position.<br />
The intercept position is either the first telephone in the HiPath BizIP or has<br />
been set up with Web > Connectivity Settings > Telephony<br />
> Miscellaneous.