Operation

10.1.5 Driving
Please read following rules, if the machine isn't in drive position.
Directions: Should the upperstructure be positionend in excess of 90 0 from the driving position, driving
controls will be in reverse order. To check the function of driving controls operate foot pedal with caution.
If the operator isn't sure in which direction the machine's moving, he has to tip softly on the foot pedal
before start driving.
Driving preparation: Prior to driving warm engine 2 ­ 3 minutes. Raise chassis and stabilizers off the
ground. Parallel steering stabilizers. Engage steering switch 19 to lock in steering. Place boom assembly
between driving wheels. Steering by the Joy Stick (change into steering mode)
10.1.6 Driving up steep roads
Steep roads must be navigated with the following engine setting:
1 Mobile with one speed: Maximum revolutions (2400 rpm), control the speed using the foot pedal.
2 Mobile with 2 speeds and 4x4plus: Maximum revolutions (2400 rpm.), drive in first gear and control
the speed using the foot pedal.
In this setting, the diesel engine has adequate braking force and cannot therefore be over­
revved.
Betriebsanleitung – Seite