Maintenance and Care

Working with the machine
Hoisting operation
Switch on the overload warning device with the switch on the right is you
want to move a load within the load range
An acoustic and visual signal (19 warns you if the load is too heavy to be
liftedIf a warning is issued then the load must be lowered to the bottom immediately
(danger of tilting).
Note !
Liability
The manufacturer refuses to accept any liability for damage resulting
form nonobservance of
operating instructions or if the customer carries out changes to
the overload warning device. 1
Load diagram T1.8
Requirements: Even and paved location, stabilizers and wheels to max. width,
stabilizers extendend, chassis as low as possible.
7
6
5
4
3
2
1
0
-1
-2
-3
-3 -2 -1 0 1 2 3 4 5 6 7 8
Operation Manual Menzi Muck A81 Page 103
kN
100
90
80
70
60
50
40
30
20
10
0
-10