Maintenance and Care

More documents

Recommendations

Info

Maintenance and Care Warning ! Dirty machine • Can result in death or severe injuries. • Clean the machine thoroughly after using for a longer period, or as required, . Attention ! Dirty machine • Can result in damage to property or in premature ageing. • Clean the machine thoroughly after using for a longer period, or as required, . Warning ! Risk of injury from incorrect spare parts • Incorrect or missing spare parts may result in damages, incorrect function or total failure of the equipment as well as also impairing safety. The same applies to inappropriate or incorrectly installed spare parts. • Only use original spare parts of the manufacturer. Attention ! Welding work at the machine • Can result in damage to property. 1. Set the ignition key to 0 2. Switch off the main switch. 3. Connect the minus terminal to the batters. 4. Connect the earth terminal directly next the part to be welded (observe perfect contact). Page 122 www.menzimuck.com
Maintenance and Care 8.2 Machine position for maintenance work Attention ! Incorrect position of machine during maintenance work • Can result in damage to property. • Park the machine horizontally as shown in the diagram below for maintenance and checks. (Place machine in a horizontal position, lower to ground, set supports straight, extend and lower boom). Operation Manual Menzi Muck A81 Page 123
Page 1 and 2:
Maintenance - and Operation Manual
Page 3 and 4:
Index 1. General 10 1.1 Explanation
Page 5 and 6:
Index 5. Transport, packaging and s
Page 7 and 8:
Index 7. Working with the machine 7
Page 9 and 10:
Index 8.9 Electric system 148 8.9.1
Page 11 and 12:
General 1.2 Information on the oper
Page 13 and 14:
General 1.8 EC-Declaration 1. Manuf
Page 15 and 16:
Safety 2.1.6 Sufficient ventilation
Page 17 and 18:
Safety 2.2.2 Meaning of the warning
Page 19 and 20:
Safety Operation Manual Menzi Muck
Page 21 and 22:
Technical Data 3.2 Weights Type A81
Page 23 and 24:
Technical Data Lifting force diagra
Page 25 and 26:
Technical Data Operation Manual Men
Page 27 and 28:
Structure 4.2 Menzi Muck A81 with s
Page 29 and 30:
Transport, packaging and storage Wa
Page 31 and 32:
Transport, packaging and storage At
Page 33 and 34:
Transport, packaging and storage 7.
Page 35 and 36:
Page 37 and 38:
Page 39 and 40:
Chassis Transport, packaging and st
Page 41 and 42:
Page 43 and 44:
Control and Display elements 6.3 Di
Page 45 and 46:
Control and Display elements 6.3.5
Page 47 and 48:
Control and Display elements Circul
Page 49 and 50:
Control and Display elements Keywor
Page 51 and 52:
Control and Display elements Diesel
Page 53 and 54:
Control and Display elements Detail
Page 55 and 56:
Control and Display elements 1. Boo
Page 57 and 58:
Control and Display elements 1. Boo
Page 59 and 60:
Control and Display elements 6.5 Pe
Page 61 and 62:
Control and Display elements 6.6 Ad
Page 63 and 64:
Grammer Control and Display element
Page 65 and 66:
Control and Display elements 6.6.5
Page 67 and 68:
Control and Display elements 6.7 Ca
Page 69 and 70:
Control and Display elements 6.8 Co
Page 71 and 72: Control and Display elements 6.9.2
Page 73 and 74: Control and Display elements 6.10 T
Page 75 and 76: Control and Display elements Securi
Page 77 and 78: Lower the cab: Control and Display
Page 79 and 80: Working with the machine Warning !
Page 89 and 90: Working with the machine 7.1.6 Safe
Page 91 and 92: 7.1.7 Towing Working with the machi
Page 93 and 94: Working with the machine 7.1.9 Warn
Page 95 and 96: Working with the machine 7.2.5 Work
Page 97 and 98: Working with the machine 7.3.2 Dail
Page 99 and 100: Working with the machine 7.3.3 Star
Page 101 and 102: Working with the machine 7.4 Operat
Page 103 and 104: Working with the machine Hoisting o
Page 105 and 106: Working with the machine Steerable
Page 107 and 108: 7.6.2 Driving Working with the mach
Page 109 and 110: Working with the machine 7.6.4 Stee
Page 111 and 112: Working with the machine 7.6.6 Mech
Page 113 and 114: Working with the machine 7.7 Operat
Page 115 and 116: Working with the machine 7.8.2 Tilt
Page 117 and 118: Working with the machine Operation
Page 119 and 120: Maintenance and Care 8.1.3 Work equ
Page 121: Maintenance and Care 8.1.6 Actuated
Page 125 and 126: Maintenance and Care Elektrical sys
Page 127 and 128: Maintenance and Care 8.5 Engine and
Page 129 and 130: Maintenance and Care Mainetnance of
Page 131 and 132: Maintenance and Care 12. Screw on t
Page 133 and 134: Maintenance and Care Bleeding the f
Page 135 and 136: Maintenance and Care 8.7 Gears 8.7.
Page 137 and 138: Maintenance and Care 8.8 Hydraulic
Page 139 and 140: Maintenance and Care 5. Loosen the
Page 141 and 142: Maintenance and Care 8.8.4 Changing
Page 143 and 144: Maintenance and Care Replace partia
Page 145 and 146: Maintenance and Care 8.8.6 Hydrauli
Page 147 and 148: Maintenance and Care Operation Manu
Page 149 and 150: Maintenance and Care 8.9.1 Batterie
Page 151 and 152: Maintenance and Care No. Functions
Page 153 and 154: Maintenance and Care 8.9.5 Control
Page 155 and 156: Maintenance and Care Note ! Safety
Page 157 and 158: Maintenance and Care ICN-V stabilis
Page 159 and 160: Maintenance and Care 8.9.11 Electri
Page 173 and 174:
Maintenance and Care Slewing ring L
Page 175 and 176:
Maintenance and Care Steered wheels
Page 177 and 178:
Maintenance and Care 8.11.2 Refill
Page 179 and 180:
Maintenance and Care 8.13 Proof of
Page 181 and 182:
Faults and fault rectification 9. F
Page 183 and 184:
Faults and fault rectification Engi
Page 185 and 186:
Faults and fault rectification Boom
Page 187 and 188:
Notes for spare part orders 10. Not
Page 189:
Appendix 12. Appendix Operation Man
show all

Maintenance and Care

Create successful ePaper yourself

Delete template?

Save as template?