Maintenance and Care
Maintenance and Care
Maintenance and Care
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Transport, packaging <strong>and</strong> storage<br />
7. Swivel the upper structure by 180°<br />
(pull up boom <strong>and</strong> dipper when<br />
swivelling).<br />
8. Position the excavator arm between<br />
the front support <strong>and</strong> then<br />
place on the ground<br />
9. Lower the boom <strong>and</strong> at the same<br />
time slightly extend the dipper<br />
so that the complete excavator is<br />
lifted to the height of the loading<br />
bridge.<br />
10. Extend the excavator arm including<br />
the telescope <strong>and</strong> at the<br />
same time activate the travelling<br />
gear until the machine is completely<br />
on the loading bridge.<br />
11. Before the excavator arm is lifted,<br />
make sure that the steering wheels<br />
are fully on the loading bridge.<br />
12. Move the machine to the required<br />
position using the hub engine.<br />
13. Lower the excavator arm onto the<br />
loading area.<br />
14. Switch off the motor.<br />
15. Release the residual pressure<br />
from the hydraulic system.<br />
The procedure for unloading is the reverse of that of loading.<br />
Operation Manual Menzi Muck A81 Page 33