Maintenance and Care

Maintenance and Care
8.9 Electric system
Attention !
24 VDC voltage
• Can result in damage to property.
• Only connect consumers with a voltage of 24 VDC.
Attention !
Jump-starting with batteries disconnected
• Can result in damage to property.
• Only connect a jump-started when the batteries are connected
and tightened in place
Attention !
Welding work at the machine
Can result in damage to property.
1. Set the ignition key to 0
2. Switch off the main switch.
3. Connect the minus terminal to the batters.
4. Remove all plug connections from electronic devices.
5. Connect the earth terminal directly next the part to be welded
(observe perfect contact).
Page 148 www.menzimuck.com
1
2