Maintenance and Care
Maintenance and Care
Maintenance and Care
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Transport, packaging <strong>and</strong> storage<br />
5.2.3 Release the residual pressure<br />
For a certain time, some of the components of the hydraulic system remain pressurised after switching off the motor.<br />
To release the residual pressure from the hydraulic system, proceed as follows:<br />
1. Turn the ignition key up to the first stop to activate the electric system of the excavator (control lamps <strong>and</strong> display<br />
light up) without starting the motor.<br />
2. Fold down the arm rest of the driver's seat.<br />
3. Depressurise the hydraulic system using the joystick <strong>and</strong> the pedals.<br />
5.2.4 Clamp the machine<br />
1. Align the upper structure parallel to the truck.<br />
2. Lock the cab <strong>and</strong> remove the ignition key.<br />
3. After loading, place blocks under the excavator wheels<br />
<strong>and</strong> then secure it on the loading area against slipping,<br />
tilting <strong>and</strong> moving off independently. Only clamp the<br />
machine at suitable locations (Pos. 1+2). Be careful<br />
with the hydraulic line guides <strong>and</strong> the movable guards.<br />
4. Check the overall height <strong>and</strong> correct as required.<br />
Mounting eyes<br />
Front stabilizers<br />
Rear stabilizers<br />
Page 34 www.menzimuck.com<br />
max. 4m<br />
1<br />
Rear stabilizers directed<br />
2
Change language