Lesson 20 Anchor Bolt Plan Frame Cross Section ... - VP Buildings

More documents

Recommendations

Info

Lesson 20 Arrowheads 26. Arrowheads – This option allows the use of optional Arrowhead styles to be used on text and dimensions. Shown is the various styles using both with the “Std.” And “Text & Line” dimension styles. 27. Once desired changes have been made OK out. 28. If the dimension is not what you want repeat step 3. 29. Print Preview before printing to ensure the dimension is correct. 30. If the preview looks correct, pick a different drawing. The system will then ask if you want to save, click yes. VPC Plot - How To Move Multiple Dimension Lines (Rev: 10/16/06) There are two methods of moving Dimension Lines. Method 1 Method 1 1. Select a drawing from the Drawing List dialog box. 2. Move or close the drawing list dialog box out of your way. 3. Left mouse click on all the dimension lines you want to move at once. They will highlight as you click them. 4. Hold the left mouse button down on the dimension you want the move based off of, and release the button where you want the dimension to be. 5. If the dimension is not where you want it repeat step 2. 6. Once you are done moving the selected item, you MUST right click to unselect the items. 7. Print Preview before printing to ensure the dimensions are correct. 06.16.09 18 of 35 Lesson 20
Lesson 20 8. If the preview looks correct, pick a different drawing. The system will then ask if you want to save, click yes. Note: When selecting multiple dimensions, make sure you click the desired dimension and release the button BEFORE moving to the next dimension. If the button is still depressed when you move to the next dimension you will move all earlier dimensions based on this move. 06.16.09 19 of 35 Lesson 20
Page 1 and 2: Lesson 20 Input and run a 100' x 10
Page 3 and 4: Lesson 20 6. To switch the Alpha an
Page 5 and 6: Lesson 20 20. Choose Yes at the “
Page 7 and 8: Lesson 20 VPC Plot - How To have th
Page 9 and 10: Lesson 20 VPC Plot - How To Add Tex
Page 11 and 12: Lesson 20 4. By clicking on the but
Page 13 and 14: Lesson 20 Text 5. X,Y - This option
Page 15 and 16: Lesson 20 Text Location 13. Text Lo
Page 17: Lesson 20 22. Symbol - Circle optio
Page 21 and 22: Lesson 20 (Trim Line) (Extend Line)
Page 23 and 24: Lesson 20 Note: When you select an
Page 25 and 26: Lesson 20 VPC Plot - How To Revise
Page 27 and 28: Lesson 20 VPC Plot - How To use Lay
Page 29 and 30: Lesson 20 1. Open your VP-Command f
Page 31 and 32: Lesson 20 Number of Details per Pag
Page 33 and 34: Lesson 20 orientation. 5. Click the
Page 35: Lesson 20 VPC Plot - How To Print M

Lesson 20 Anchor Bolt Plan Frame Cross Section ... - VP Buildings

Create successful ePaper yourself

Delete template?

Save as template?