Lesson 20 Anchor Bolt Plan Frame Cross Section ... - VP Buildings

More documents

Recommendations

Info

Lesson 20 Rev: OK 5/06/02 This How-to describes the VP Command feature of combining drawings that share a common plane. The following steps refer to generating a drawing for a Rigid Frame combined with Lean-to. Other instances where this VP Command feature could be used are for Frames Across Shapes, multiple Portal Frames on a Sidewall, Wall Secondary, Covering, and Liner sharing the same plane. 9. Go to VPC Plot and open your VP Command file. 10. The Drawing List dialog box will appear on the screen as shown. 11. Select the Drawing Size prior to generating any drawings. 12. Select the Drawing Styles as Erection Drawing. 13. Move Drawing List window as far left and down but still have the Insert Button in view. Select the Insert Button. 14. Select the Type of Erection Drawing you want to generate. 15. Select from the Available Locations the first plane of the drawing you want to generate. 16. Hold down the Ctrl key and select the next plane(s) of the drawing you want to generate. 17. Once you have selected the locations you want generated, select OK. 06.16.09 22 of 35 Lesson 20
Lesson 20 Note: When you select an Available Location the Drawing in the background will highlight the selected plane. See graphics below for resulting drawings from various selections: 06.16.09 23 of 35 Lesson 20
Page 1 and 2: Lesson 20 Input and run a 100' x 10
Page 3 and 4: Lesson 20 6. To switch the Alpha an
Page 5 and 6: Lesson 20 20. Choose Yes at the “
Page 7 and 8: Lesson 20 VPC Plot - How To have th
Page 9 and 10: Lesson 20 VPC Plot - How To Add Tex
Page 11 and 12: Lesson 20 4. By clicking on the but
Page 13 and 14: Lesson 20 Text 5. X,Y - This option
Page 15 and 16: Lesson 20 Text Location 13. Text Lo
Page 17 and 18: Lesson 20 22. Symbol - Circle optio
Page 19 and 20: Lesson 20 8. If the preview looks c
Page 21: Lesson 20 (Trim Line) (Extend Line)
Page 25 and 26: Lesson 20 VPC Plot - How To Revise
Page 27 and 28: Lesson 20 VPC Plot - How To use Lay
Page 29 and 30: Lesson 20 1. Open your VP-Command f
Page 31 and 32: Lesson 20 Number of Details per Pag
Page 33 and 34: Lesson 20 orientation. 5. Click the
Page 35: Lesson 20 VPC Plot - How To Print M

Lesson 20 Anchor Bolt Plan Frame Cross Section ... - VP Buildings

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?