Lesson 20 Anchor Bolt Plan Frame Cross Section ... - VP Buildings

More documents

Recommendations

Info

Lesson 20 and pick the first drawing in the list, then the last drawing. All drawings should then be selected. 7. Next click on the Print button inside the dialog box. 8. Click the OK button on the Print dialog box when it comes up 06.16.09 34 of 35 Lesson 20
Lesson 20 VPC Plot - How To Print Multiple Drawings (New: 11/02/06) 1. Select a drawing from the Drawing List dialog box. 2. Move or close the drawing list dialog box out of your way. 3. Left mouse click on the Print Preview Tab. 4. Look for over-plotting, Close and fix if required. 5. Continue doing steps 1 thru 4 until all drawings are checked and fixed. 6. Once you are satisfied with the drawings, go back to the Drawing List dialog box. 7. Select as many drawings as you wish to print at one time by holding the Ctrl key down, on the keyboard, and left mouse click each of the drawings you want. If you want to print all drawings, then hold down the Shift key, on the keyboard, and pick the first drawing in the list, then the last drawing. All drawings should then be selected. 8. Next click on the Print button inside the dialog box. 9. Click the OK button on the Print dialog box when it comes up 06.16.09 35 of 35 Lesson 20
Page 1 and 2: Lesson 20 Input and run a 100' x 10
Page 3 and 4: Lesson 20 6. To switch the Alpha an
Page 5 and 6: Lesson 20 20. Choose Yes at the “
Page 7 and 8: Lesson 20 VPC Plot - How To have th
Page 9 and 10: Lesson 20 VPC Plot - How To Add Tex
Page 11 and 12: Lesson 20 4. By clicking on the but
Page 13 and 14: Lesson 20 Text 5. X,Y - This option
Page 15 and 16: Lesson 20 Text Location 13. Text Lo
Page 17 and 18: Lesson 20 22. Symbol - Circle optio
Page 19 and 20: Lesson 20 8. If the preview looks c
Page 21 and 22: Lesson 20 (Trim Line) (Extend Line)
Page 23 and 24: Lesson 20 Note: When you select an
Page 25 and 26: Lesson 20 VPC Plot - How To Revise
Page 27 and 28: Lesson 20 VPC Plot - How To use Lay
Page 29 and 30: Lesson 20 1. Open your VP-Command f
Page 31 and 32: Lesson 20 Number of Details per Pag
Page 33: Lesson 20 orientation. 5. Click the

Lesson 20 Anchor Bolt Plan Frame Cross Section ... - VP Buildings

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?