Altivar 38 - variable speed drive - user's manual

More documents

Recommendations

Info

Altivar 38 FRANÇAIS ENGLISH DEUTSCH ESPAÑOL ITALIANO 2
When the drive is powered up, the power components and some of the control components are connected to the line supply. It is extremely dangerous to touch them. The drive cover must be kept closed. CAUTION locking system is not sufficient: fit a cut-off on the power circuit. After the ALTIVAR has been switched off and the green LED has gone out, wait for 3 to 10 minutes before working on the equipment. This is the time required for the capacitors to discharge. The motor can be stopped during operation by inhibiting run commands or the speed reference while the drive remains powered up. If personnel safety requires prevention of sudden restarts, this electronic ENGLISH The drive is fitted with safety devices which, in the event of a fault, can shut down the drive and consequently the motor. The motor itself may be stopped by a mechanical blockage. Finally, voltage variations, especially line supply failures, can also cause shutdowns. NOTE If the cause of the shutdown disappears, there is a risk of restarting which may endanger certain machines or installations, especially those which must conform to safety regulations. In this case the user must take precautions against the possibility of restarts, in particular by using a low speed detector to cut off power to the drive if the motor performs an unprogrammed shutdown. Equipment should be designed in accordance with the specifications laid down in the IEC standards. As a rule, the drive power supply must be disconnected before any operation on either the electrical or mechanical parts of the installation or machine. The products and equipment described in this document may be changed or modified at any time, either from a technical point of view or in the way they are operated. Their description can in no way be considered contractual. The Altivar 38 must be considered as a component: it is neither a machine nor a device ready for use in accordance with European directives (machinery directive and electromagnetic compatibility directive). It is the responsibility of the end user to ensure that the machine meets these standards. CAUTION The specifications contained in this document must be applied in order to comply with the essential The drive must be installed and set up in accordance with both international and national standards. Bringing the device into conformity is the responsibility of the systems integrator who must observe the EMC directive among others within the European Union. requirements of the EMC directive. 67
Page 1: Altivar 38 Telemecanique User's man
Page 5 and 6: Preliminary Recommendations Accepta
Page 7 and 8: Available Torque Torque characteris
Page 9 and 10: Technical Specifications Electrical
Page 11 and 12: Mounting and Temperature Conditions
Page 13 and 14: Removing the IP 41 Protective Blank
Page 15 and 16: Access to Terminals - Power Termina
Page 17 and 18: Control Terminals Terminal characte
Page 19 and 20: Electromagnetic Compatibility - Wir
Page 21 and 22: Connection Diagrams 3-phase power s
Page 23 and 24: Connection Diagrams Diagram with do
Page 25 and 26: Access to Menus The number of menus
Page 27 and 28: Macro-Configurations This parameter
Page 29 and 30: Adjust Menu This menu can be access
Page 31 and 32: Adjust Menu Code Description Adjust
Page 33 and 34: Drive Menu ENGLISH Code Description
Page 35 and 36: Control Menu This menu can be acces
Page 37 and 38: Control Menu Code Description Adjus
Page 39 and 40: I/O Menu ENGLISH Summary table of t
Page 41 and 42: I/O Menu Some reassignments result
Page 43 and 44: Configurable I/O Application Functi
Page 51 and 52: Fault Menu This menu can be accesse
Page 53 and 54:
Files Menu This menu can be accesse
Page 55 and 56:
Communication and Application Menus
Page 57 and 58:
Faults - causes - remedies ENGLISH
Page 59 and 60:
Faults - causes - remedies Malfunct
Page 61 and 62:
Record of configuration and adjustm
Page 63 and 64:
Summary of menus ENGLISH 3 - DRIVE
Page 65 and 66:
Index ENGLISH Function Menus Pages
show all

Altivar 38 - variable speed drive - user's manual

Create successful ePaper yourself

Delete template?

Save as template?