User Manual
User Manual
User Manual
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
- 50 -<br />
ACT – Indicates exchange of data with extension units on RS485 Bus.<br />
1, 2, 3, 4 – Shows state of outlets on/off.<br />
Pic 4.9: IP PDU 5510.008/5510.108 LEDs on the front side<br />
Description of I/O on the IP PDU back panel of 5510.008/ 5510.108<br />
The back panel of IP PDU contains the following I/O and LEDs (See Pic. 5.10):<br />
PWR 1, 2 connectors C14. Power cable 230V IEC60320 C13. There are built-in 10A<br />
fuses on each line.<br />
Outputs 1...8 connectors C13 230V with relay contacts. Max. load current per one outlet<br />
- 5A. Max. total load current - 20А. Cables used IEC60320 C14/С13. If needed power<br />
can be switched on/off on each outlet remotely via IP.<br />
Current of each outlet is measured and is shown in the interface. In addition, power consumption<br />
is shown.<br />
Possibility to use 3-level access to IP PDU, allowing certain user to control certain outlet.<br />
Pic. 4.10: IP PDUs 5510.008/5510.108, back view<br />
Pic. 4.11: IP PDUs 5510.008/5510.108, back view<br />
<strong>User</strong> <strong>Manual</strong>
Change language