AHMEDABAD DIVISION TENDER DOCUMENT ... - Western Railway
AHMEDABAD DIVISION TENDER DOCUMENT ... - Western Railway
AHMEDABAD DIVISION TENDER DOCUMENT ... - Western Railway
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
[Downloaded from Internet]<br />
(G) Technical specification for Item No. 9 of SCHEDULE of rates and<br />
quantities : [out door type box]<br />
The contractor shall have to design, supply, install, test and commission out door<br />
type box with common key lock arrangement detailed as under. Incoming & out<br />
going connections shall be properly made by the contractor with use of proper<br />
size of termination lugs etc. The contractor should be got approval from ADEE /P/ADI<br />
for out door type box, MCB and ray roll plug socket and it's mounting arrangement also<br />
before supply & erection.<br />
The box shall have following items .<br />
L/T-Hager-NC232N or its<br />
equivalent<br />
of<br />
Siemens/Schneider/C&S<br />
1<br />
1 No.<br />
Indoasian makes only.<br />
32 Amp.MCB ,DP<br />
2 20 Amp. ray roll plug<br />
socket<br />
3 MS box 400x300x150<br />
1 No.<br />
1 No.<br />
MP/MS20-BCH or it’s<br />
equivalent model of C&S/<br />
Gewiss/ Hensel make only.<br />
BIL50090-BCH or it’s<br />
equivalent model of C&S/<br />
Legrand make only.<br />
The contractor should submit the copy of challan or bill for the above material<br />
supplied from the manufacturer/authorized dealer issued on the name of<br />
contractor.<br />
(H) Technical specification for item No. 10 of SCHEDULE of rates and quantities:<br />
[LED light fitting]<br />
The contractor shall have to supply, fixing, testing and commissioning of 24 W LED type<br />
light fitting complete with all associated accessories. The light should be of Goldwyn<br />
Model No. XS 03 17 CA or equivalent model of Crompton greaves or Surya or Wipro or<br />
GE make. It should be suitable for operation on 230V 50 C/S A.C. supply. Make and<br />
model should be got approved by Sr.DEE/ADI before supply.<br />
The contractor shall provide the mounting arrangement to fittings with all necessary<br />
hardware as per site condition and connection to the fittings shall be made with the 3<br />
core 1.5 sq. mm FR PVC insulated flexible copper wire. The contractor should be got<br />
approval from Sr. DEE /ADI for fittings and it's mounting arrangement also before supply<br />
& erection.<br />
The contractor should submit the copy of challan or bill for the LED light from the<br />
manufacturer/authorized dealer issued on the name of contractor.<br />
[ Tenderer ] [ Page 41of 44 ] [For Sr.DEE/ADI ]