NAT-MCH Users Manual Version 1.16
NAT-MCH Users Manual Version 1.16
NAT-MCH Users Manual Version 1.16
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
<strong>NAT</strong>-<strong>MCH</strong> – <strong>Users</strong> <strong>Manual</strong><br />
5.4.8 SRIO Switch Configuration [9] (optional)<br />
By the SRIO configuration parameters the operation of the (optional) SRIO Hub module is<br />
controlled.<br />
Configuration Option default Description<br />
operating mode No uplink Operation mode of the SRIO Switches:<br />
• No uplink, dual x4 Interconnect (default)<br />
• Dual Uplink Mode<br />
• Single Uplink + BP Fabric Update<br />
5.4.9 NTP Configuration [10]<br />
Enables and configures the NTP client of the <strong>MCH</strong><br />
Configuration Option default Description<br />
NTP server IP 0.0.0.0 IP address of the NTP server<br />
NTP ‘check for time’ delay 0 Time interval to request an time update form the time<br />
minutes<br />
server<br />
NTP ‘check for time’ delay hours 0<br />
NTP local time offset 0 Local time offset to GMT in hours<br />
NTP client disabled Enables/disables NTP client<br />
5.4.10 DHCP Configuration [11]<br />
Allows setting of configuration options for the build in DCHP client.<br />
Note: The DHCP client is activated by setting the configuration option <br />
to “DCHP” in the global <strong>MCH</strong> parameters.<br />
Configuration Option default Description<br />
Hostname “” Designated Hostname for this <strong>MCH</strong><br />
Flags 0 - unused -<br />
<strong>Version</strong> <strong>1.16</strong> © N.A.T. GmbH 37