NAT-MCH Users Manual Version 1.16
NAT-MCH Users Manual Version 1.16
NAT-MCH Users Manual Version 1.16
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
<strong>NAT</strong>-<strong>MCH</strong> – <strong>Users</strong> <strong>Manual</strong><br />
10.6 OR Value to Clock Module Register<br />
Description:<br />
OR a value to a clock module register. This can be used to set specific bits of a register.<br />
NOTE: This configuration item only should be used if the required functionality has not yet<br />
been implemented by another configuration item. Please ask <strong>NAT</strong> for adding support of the<br />
needed functionality, as the register layout might differ depending on the clock module<br />
version used!<br />
Syntax:<br />
clk_orreg = offs, value<br />
Parameter Description:<br />
Example:<br />
offs: register offset<br />
value: value to OR with current register value<br />
clk_orreg = 0x10, 0x01<br />
Set bit 0 (0x01) in clock module register at offset 0x10.<br />
<strong>Version</strong> <strong>1.16</strong> © N.A.T. GmbH 63
Change language