NAT-MCH Users Manual Version 1.16
NAT-MCH Users Manual Version 1.16
NAT-MCH Users Manual Version 1.16
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<strong>NAT</strong>-<strong>MCH</strong> – <strong>Users</strong> <strong>Manual</strong><br />
10.7 AND Value to Clock Module Register<br />
Description:<br />
AND a value to a clock module register. This can be used to clear specific bits of a register.<br />
NOTE: This configuration item only should be used if the required functionality has not yet<br />
been implemented by another configuration item. Please ask <strong>NAT</strong> for adding support of the<br />
needed functionality, as the register layout might differ depending on the clock module<br />
version used!<br />
Syntax:<br />
clk_andreg = offs, value<br />
Parameter Description:<br />
Example:<br />
offs: register offset<br />
value: value to AND with current register value<br />
clk_andreg = 0x10, 0x7f<br />
Clear bit 7 (0x80) in clock module register at offset 0x10.<br />
<strong>Version</strong> <strong>1.16</strong> © N.A.T. GmbH 64
Change language