NAT-MCH Users Manual Version 1.16
NAT-MCH Users Manual Version 1.16
NAT-MCH Users Manual Version 1.16
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<strong>NAT</strong>-<strong>MCH</strong> – <strong>Users</strong> <strong>Manual</strong><br />
Read the Clock Module board identifier:<br />
� ipmitool –H 132.147.160.251 –P “” –t 0x82 –T 0x14 raw 0x30 0x01<br />
0x00 0x00 0x00<br />
Read the Clock Module PCB version:<br />
� ipmitool –H 132.147.160.251 –P “” –t 0x82 –T 0x14 raw 0x30 0x01<br />
0x00 0x00 0x01<br />
Read the Clock Module reference 0 selection:<br />
� ipmitool –H 132.147.160.251 –P “” –t 0x82 –T 0x14 raw 0x30 0x01<br />
0x00 0x00 0x04<br />
Write the Clock Module reference 0 selection to 0xaa:<br />
� ipmitool –H 132.147.160.251 –P « » –t 0x82 –t 0x14 raw 0x30<br />
0x02 0x00 0x00 0x04 0xaa<br />
<strong>Version</strong> <strong>1.16</strong> © N.A.T. GmbH 88
Change language