Firstbeat SPORTS 4.2 Technical manual - Firstbeat Technologies

Figure 4. Firstbeat SPORTS set-up wizard.
Run the set-up wizard by following the set up wizard instructions. It will help you to get started with
actual software.
It is recommended to define also some other settings of the software before use:
Select variables to be shown in measurements view.
By selecting the variables which are shown in the measurements table you will help the analysis
of the training and recovery information. Select visible variables by clicking the ’View setting’
from under the measurements table.
Define training monitor settings
If you have the hardware to use Training Monitor it is recommended to define the training
monitor settings to correspond to your use of the software. See the detailed instructions from
the chapter Training Monitor.
If you want to add your company logo and text to the feedback reports
You can add your company logo and text to the feedback reports by clicking ’Tools’ ’Options’
’Reports’.
BEYOND HEART RATE | FIRSTBEAT TECHNOLOGIES | WWW.FIRSTBEAT.FI | 11