Firstbeat SPORTS 4.2 Technical manual - Firstbeat Technologies

DATA ANALYSIS REPORT
This chapter provides information how to create the Data analysis report from
selected measurement period and what physiological variables you have available
for the report. You will find also information about languages you have available for
the report and what you should take into account when creating the report.
General chart of the chosen measurement and variables produced by analysis in graphical mode can be
examined using data analysis report. The measurement can be treated as a whole or split into shorter
periods. PDF-report can be made from selected variables during the wanted period.
Physiological state overview
Artifact corrected heart rate
Artifact corrected R-R interval
Respiration rate
Ventilation
EPOC
VO 2
VO 2 max %
HF Heart rate variability
LF Heart rate variability
VLF Heart rate variability
RMSSD
Energy expenditure
Fat % expenditure
Cumulative exercise induced (net) energy expenditure
CREATING DATA ANALYSIS REPORT
Start data analysis report by choosing ’Reports‘ -> ’Data Analysis Report’
You can examine different charts by choosing the wanted variable from the ’Chart‘ menu.
If you want to select certain period instead of the whole measurement, set cursors to the right
places. The new temporary measurement period is analyzed from the selected time period and
reports are created from that period. The temporary measurement period is not saved.
If you want to create a report, choose charts presented in data analysis report from the data
analysis report tab one by one or select all.
Press ’Create report’.
Select destination and name the report.
Press ’Save’.
BEYOND HEART RATE | FIRSTBEAT TECHNOLOGIES | WWW.FIRSTBEAT.FI | 52