Firstbeat SPORTS 4.2 Technical manual - Firstbeat Technologies

Synchronize the Bodyguard’s internal clock to PC’s date and time by pressing button ‘Sync time now’.
Save the new configuration by pressing button ‘Save’ or close the tool with button ‘Cancel’.
GARMIN DEVICE SETTINGS
To use the Garmin device with Firstbeat SPORTS the user must set the device's R-R recording on by
using the program's setting tool. Firstbeat SPORTS creates a setting file that is sent to the device the
next time it is connected to the Garmin ANT Agent -> The setting is changed only through this process.
Garmin ANT Agent version 2.3 or newer is required for turning on the R-R recording. See
http://www.garmin.com/support for the latest version. The setting tool also enables user to pair the
device with a certain profile so that all the new unloaded measurements can be loaded on every startup.
Check the Device ID from the device settings (Menu->Setup->System->About->Unit ID).
Figure 22. Garmin device config tool
Select “Tools‟ “Device settings‟ “Garmin device config tool‟
Pair the device with a profile from drop down menu.
Turn R-R recording on from dropdown menu if you want to get full compatibility with Firstbeat
SPORTS.
Click “Search new Garmin measurements at startup” checkbox below if you want set automatic
Garmin measurement download on.
User can also click the checkbox below the device listing to prevent searching for new devices if
they are installed later to Garmin ANT Agent.
BEYOND HEART RATE | FIRSTBEAT TECHNOLOGIES | WWW.FIRSTBEAT.FI | 29