2 - Schneider Electric CZ, s.r.o.

Presentation,
description
Communication
Ethernet Modbus/TCP network
TwidoPort interface module for Modicon M238 logic
controller, compact base for solutions with AFB
Presentation
TwidoPort module 499 TWD 01100 is an Ethernet interface that is easy to use and
dedicated to Modicon M238 logic controllers type S. It allows incorporation of this
controllers into an Ethernet network as a passive device (slave). .
When connected to the integrated RS 485 serial port acts as a gateway between the
Ethernet network and the controller’s Modbus serial link port.
1
2
3
The main characteristics of the TwidoPort module are as follows:
b Connects to the RS 485 of the Modicon M238 controller type S (marked SL1 or
SL2 depending on model); no external auxiliary supply is necessary.
b Ethernet configuration:
v takes the Ethernet configuration from the Twido application configuration
(normal mode),
v supports manual configuration using Telnet.
b Provides Ethernet statistics via a Telnet session.
Description
The TwidoPort 499 TWD 01100 interface module comprises:
1 Five pilot lights indicating the status of the interface and of the TwidoPort module
links.
2 An RJ45 type connector for connection of the power supply and of the link to the
controller’s integrated RS 485 port. This connection is made using connection
cable TWD XCA RJP03P supplied with the TwidoPort interface module in case of
the Twido controller.
3 An RJ45 connector (accessed through the bottom of the module) for connection
to the Ethernet TCP/IP network.
4 An earthing screw (accessed through the bottom of the module).
4
5
Modbus
Ethernet Modbus/TCP
network
2
Modicon M238
type S
The TwidoPort interface module can be mounted as standard on a symmetrical 5
rail. Fixing kit TWD XMT5 (sold in lots of 5) allows plate or panel mounting
(2 x Ø 4.3 holes).
6
1
To order separately
For connecting to the Modicon M238 controller type S, the cordset for connection
Modbus XBT Z9980 (lenght 2.5 m).
7
4
3
8
9
10
4/12