ORiNOCO® Access Points Installation and Management Guide ...

Device Configuration, Management and Monitoring using CLI6.2.7 Rules for the Table ObjectsTables hold parameters for several related items.6.2.7.1 Creation of a Table EntryWhen creating a table entry, table index and entry status are required.AP-00:7D:09 (config-mgmt-syslog-hosttbl)#rowadd 0 ?Possible CompletionscommentComment Configurationentry-status Entry Status Configurationentry-status-end Entry Status Configuration(Used for TBC)ipaddressIpAddress ConfigurationportPort ConfigurationAP-00:7D:09 (config-mgmt-syslog-hosttbl)#rowadd 0 entry-status 4AP-00:7D:09 (config-mgmt-syslog-hosttbl)#rowadd 0 ipaddress 10.0.0.1AP-00:7D:09 (config-mgmt-syslog-hosttbl)#rowadd 0 port 123AP-00:7D:09 (config-mgmt-syslog-hosttbl)#rowadd 0 comment stringAP-00:7D:09 (config-mgmt-syslog-hosttbl)#rowadd 0 entry-status 4:• For dynamic row creation, you have to set the entry status first and then other elements followed by setting the entrystatus again.• To update added row in TBC, use the “entry-status-end” command instead of the command “entry-status”, which endsthe creation of table.6.2.7.2 Modification of a Table EntryTo modify a table entry, you have to mention the index number.AP-00:7D:09(config-mgmt-syslog-hosttbl)#rowedit 1 ipaddress 10.0.0.106.2.7.3 Deletion of a Table Entry• To delete a table entry, mention the index number.• Entry status of the row needed to be destroyed is set to destroy.AP-00:7D:09(config-mgmt-syslog-hosttbl)#rowedit 1 entry-status destroyORiNOCO® AP-800 and AP-8000 Installation and Management Guide 132