10.07.2015 Views

ORiNOCO® Access Points Installation and Management Guide ...

ORiNOCO® Access Points Installation and Management Guide ...

ORiNOCO® Access Points Installation and Management Guide ...

SHOW MORE
SHOW LESS
  • No tags were found...

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

<strong>Installation</strong> <strong>and</strong> Initialization2.4 Optional <strong>Access</strong>oriesProxim recommends you to use the following optional accessories:What’s in the KitImage110-220V worldwide PowerAdapterRange Extender Antenna(REA)Gigabit Ethernet PoE2.5 <strong>Installation</strong> ProcedureThis section describes the procedure to install <strong>and</strong> mount the device.For Regulatory Information <strong>and</strong> latest product updates, including firmware <strong>and</strong> the MIBs, Proximrecommends you to visit its support site at http://support.proxim.com.Perform the following steps to install <strong>and</strong> mount the device.2.5.1 Install the AntennasThe omni-directional antennas supplied with the product do not require any professional installation.: Optionally, you can use the Range Extended Antenna (REA), which has 3 x RP SMA plug, that can be easily connectedto the device.If the regular outdoor antennas connected via a pigtail conversion cable, offering a st<strong>and</strong>ard connector type for antennaconnection, are used, then professional installation is required.Follow these steps to assemble the antennas:1. H<strong>and</strong>-tighten the antennas clockwise, onto the outer connectors of the device until they are firmly attached.2. Position the antennas as close to the horizontal surface (ceiling or wall), so as to get the maximum signal coverage ofthe omni-directional antenna.<strong>ORiNOCO®</strong> AP-800 <strong>and</strong> AP-8000 <strong>Installation</strong> <strong>and</strong> <strong>Management</strong> <strong>Guide</strong> 20

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!