10.07.2015 Views

ORiNOCO® Access Points Installation and Management Guide ...

ORiNOCO® Access Points Installation and Management Guide ...

ORiNOCO® Access Points Installation and Management Guide ...

SHOW MORE
SHOW LESS
  • No tags were found...

Create successful ePaper yourself

Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.

Device Configuration, <strong>Management</strong> <strong>and</strong> Monitoring using CLIDHCP Server-StatusTo enable or disable the DHCP Server-Status, enter the following CLI comm<strong>and</strong>s.AP-00:7D:09(config-dhcp)# server-status ?Possible completions:disable(1)/dhcpserver(2) Server Status ConfigurationAP-00:7D:09(config-dhcp)# server-status 2AP-00:7D:09(config)# exitAP-00:7D:09# exitAP-00:7D:09# show dhcp server-statusDHCP Server Status: dhcpserverDHCP Least-timeTo configure the DHCP Least-time, enter the following CLI comm<strong>and</strong>s.AP-00:7D:09(config-dhcp)# max-lease-time ?Possible completions: Maximum Lease Time ConfigurationAP-00:7D:09(config-dhcp)# max-lease-time 3600AP-00:7D:09(config-dhcp)# exitAP-00:7D:09(config)# exitAP-00:7D:09# show dhcp max-leasetimeMaximum Lease Time : 3600Server IP Pool TableTo configure the DHCP Server IP Pool Table parameters, enter the following CLI comm<strong>and</strong>s.AP-00:7D:09(config-dhcp)# server-ippool-tableAP-00:7D:09(config-dhcp-ippool)# rowadd 0 ?Possible completions:Execute this comm<strong>and</strong>end-ipaddressEnd Ip Address Configurationentry-statusEntry Status Configurationentry-status-endEntry Status Configuration(Used for TBC)interface-typeServer Interface Type Configurationstart-ipaddressStart Ip Address ConfigurationAP-00:7D:09(config-dhcp-ippool)# rowadd 0 entry-status 4AP-00:7D:09(config-dhcp-ippool)# rowadd 0 interface-type ?Possible completions:bridge(1)Server Interface Type ConfigurationAP-00:7D:09(config-dhcp-ippool)# rowadd 0 interface-type 1AP-00:7D:09(config-dhcp-ippool)# rowadd 0 start-ipaddress 10.0.0.10AP-00:7D:09(config-dhcp-ippool)# rowadd 0 end-ipaddress 10.0.0.50AP-00:7D:09(config-dhcp-ippool)# rowadd 0 entry-status 4AP-00:7D:09(config-dhcp-ippool)#exitAP-00:7D:09(config-dhcp)#exitAP-00:7D:09(config)#exitAP-00:7D:09# show dhcp server-ippool-tbl// DHCP SERVER IP POOL TABLE CONFIGURATION //INDEX 1Interface : bridgeStart IP Address : 10.0.0.10End IP Address : 10.0.0.50Entry Status : enable<strong>ORiNOCO®</strong> AP-800 <strong>and</strong> AP-8000 <strong>Installation</strong> <strong>and</strong> <strong>Management</strong> <strong>Guide</strong> 171

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!