Sound - Denon-DN-M1050R-manual - SXS Events

IIENGLISHvent courtesy production Phone: of and 0870 Audio-Visual 080 2342Serviceswww.sxsevents.co.ukemail: enquiries@sxsevents.co.ukDelete that track from the program.Press the “–” button.Number of track at the next step in the program11TRACK NO. SINGLE REMAINm fsTRACK NAMEThe next step number lights.To continue deleting tracks from the program, repeatsteps 11-1 and 11-2.Inserting a track in the programSelect the position at which to insert a track.Turn the select knob (8 – 9).10To insert a track at the third stepin the program:-112Exit the program editing mode.Press the PROGRAM IN button.PROGRAMINPROGRAMINFlashingPROGRAMINLit(3) Playing ProgramsSet the program insert mode.Press the “+” button.10I-2TRACK NO. SINGLE REMAINDISC NAMETRACK NAMEm s fSelect the track to be inserted.Turn the select knob (8 – 9).When track 8 is selected:10-3Number ofselected trackEnter the selected track.Press the select button.10-4To insert more tracks in the program, repeat steps 10-1,10-2, 10-3 and 10-4.(To exit the program insert mode, press the PROGRAM INbutton.)Deleting tracks from the programSelect the step to be deleted.Turn the select knob (8 – 9).11To delete the track at the third step-1LitThe step number flashes.FlashingThe number of the next stepin the program lights.1314Set the program play mode.Press PROG. PLAY ON/OFF button.PROG. PLAYON/OFFTRACK NAMEPROG. PLAYON/OFFSTANDBY/CUEPROGRAM m s fSTANDBY/CUETRACK NO. SINGLE REMAIN NEXT NO.The first track in the program is cued and the standbymode is set.Start programmed playback.Press the PLAY/PAUSE button.PLAY/PAUSE PLAY/PAUSE STANDBY/CUEProgrammed playback starts.LitFlashingLitLitNumber of next step• When the cartridge is ejected, the set program is cleared.• If a track that is not in the program is selected with a serialcommand during programmed playback, that command isignored.NOTE:Programs cannot be input when no disc is loaded.Off26Litwww.sxsevents.co.uk