Sound - Denon-DN-M1050R-manual - SXS Events

ENGLISH(3) Detailed Description of Preset Functionsvent courtesy production Phone: of and 0870 Audio-Visual 080 2342Services(* = initial setting)1) “Preset Type (*)” (Three different sets (types) of presettings can be made and used for different purposes.)www.sxsevents.co.uk* Preset email: Type1 : Set enquiries@sxsevents.co.ukto preset type 1.Preset Type2 : Set to preset type 2.Preset Type3 : Set to preset type 3.2) “Finish (*)”Finish Stop : Stop mode is set after track playing is finished.* Finish Next : Standby mode is set at next track after track playing is finished.Finish Rescue : Standby mode is set at playback start position after track playing is finished.3) “CueDet. OFF (-**)dB”* CueDet.OFF : Sound is not detected when cueing.CueDet.(-**)dB : Sound detection level setting for cueing. (-72/-66/-60/-54/-48/-42/-36)4) “Auto Inc OFF (*)”* Auto Inc OFF : No auto increment of track number.Auto Inc Dig. : Track number is automatically incremented during digital recording using subcodes on CDs or MDs (Q codes) or startIDs on DATs.Auto Inc Det. : Track number is automatically incremented during recording when level set in “5) “Inc Det. (-**)dB” setting isdetected.5) “Inc Det. (-**)dB”Inc Det.(-**)dB : Sound detection level for auto increment function. (-72/-66/*-60/-54/-48/-42/-36)6) “Pre UTOC OFF (ON)” (Playback is possible up to that point even if power supply is cut off during recording or if recording stops due to someproblem.)* Pre UTOC OFF : Pre-UTOC function off.Pre UTOC ON : Pre-UTOC function on.7) “UTOC Manual (Auto)”* UTOC Manual : UTOC is written by pressing TOC WRITE button after editing is completed.UTOC Auto : UTOC is written automatically when editing is completed.8) “RecStart (-**)dB”RecStart (-**)dB : Sound detection level for auto record start function. (-72/-66/*-60/-54/-48/-42/-36)9) “Rec Offset (*)” (Recording can be started before sound detection during auto record start operation.)Rec Offset (*) : Recording starts the set number of seconds before level detection. (*OFF/1s/2s/3s/4s/5s)10) “Rec Stereo (Mono)”* Rec Stereo : Record in stereo.Rec Mono : Record left channel signal in mono.11) “SCMS INH (ENA)”* SCNS INH : Record onto disc same code as copy prohibit code in recording source.SCMS ENA : Record copy prohibit code on disc according to SCMS.12) PitchAuto OFF (ON)”* PitchAuto OFF : Play pitch data stored on disc not used.PitchAuto ON : Play disc at play pitch stored on disc.13) “Sleep ON (OFF)”* Sleep ON : Automatically turn the servo functions off if no button is operated for 30 minutes in the pause, standby or manualsearch mode.Sleep OFF : Do not automatically turn the servo functions off.14) “FS OFF (***kHz)” (This setting can only be made when an optional FS converter is mounted.)* FS OFF : Do not use the FS converter.FS (***kHz) : Select the digital output FS. (32 kHz/44.1 kHz/48 kHz)15) “Hot Start OFF (ON)” (Hot start can be set when optional hot start unit is mounted.)* Hot Start OFF : Hot start off.Hot Start ON : Hot start on.42www.sxsevents.co.uk