Sound - Denon-DN-M1050R-manual - SXS Events

More documents

Recommendations

Info

vent 1courtesy production PART NAMES AND Phone: of FUNCTIONS and 0870 Audio-Visual 080 2342Services(1) Front Panelqwertyuiowww.sxsevents.co.ukemail: enquiries@sxsevents.co.ukPOWER button• This turns the set on and off.Cartridge insertion slot• Insert the cartridge as indicated by the arrow on the top.• Once the cartridge is partially inserted, it is drawn inautomatically.EJECT button• Press this button to eject the cartridge.• The cartridge cannot be ejected during playback or recordingor while the UTOC is being written.LEVEL control• Use this to adjust the volume of the headphones.PHONES jack• Connect headphones with an impedance of 30 to 40 Ω/ohms.STOP button• Press this button to turn all the servo functions off and stop.• Press this button during the play, recording or recordingpause mode to stop playback or recording.CUE SEARCH button• When this button is pressed during the standby, pause,search or play mode, the cue signal point direct search modeis set.When pressed again, the direct search mode is canceled.• The button lights when the direct search mode is set.STANDBY/CUE button• When this button is pressed during the play or pause mode,the pickup returns to the position at which playback startedand the standby mode is set. (Back Cue)• When pressed during playback when the next track has beenprogrammed, the programmed track is searched for and thestandby mode is set.• The button lights when the standby mode is set.• When the button is pressed during the recording or recordingpause mode, recording stops, the pickup returns to therecording start position and the standby mode is set.• When the button is pressed during the cue direct searchmode, the cue point is searched.• When the button is pressed while pressing the PLAY MODEbutton, the preset mode is set.PLAY/PAUSE button• Press this button in the standby, pause or manual searchmode to begin playback.• Press the button in the stop mode to search for the first trackand begin playback.• When the button is pressed in the recording pause mode,recording starts.• The button lights when the play or recording mode is set.• When the button is pressed during playback, the pause modeis set. The button flashes while the pause mode is set.• When the button is pressed during recording, the recordingpause mode is set. The button flashes when the recordingpause mode is set.Caution on ejecting cartridge• Do not push the cartridge back in while it is beingejected after pressing the EJECT button. If you wish toreload the cartridge, wait until it is fully ejected beforepushing it back in.• If you wish to eject a cartridge that is already partiallyinserted, first push the cartridge in further so that it isdrawn inside, then press the EJECT button to eject it.• Do not try to pull out a partially inserted cartridge.Doing so may damage it.!0 LEVEL START button• When this button is pressed during the recording pausemode, the auto level start recording mode is set.• The button flashes when the auto level start recording modeis set.• When the button is pressed again, the auto level startrecording mode is canceled.!1 REC button• When this button is pressed during the stop, standby orpause mode, the recording pause mode is set.• When the button is pressed during recording, the tracknumber is incremented.• The button lights when the recording or recording pausemode is set!2 PROG. PLAY ON/OFF button• When this button is pressed while the PROGRAM IN buttonis lit, the program play mode is set.• The button will not function during the A-B play mode.• The button lights during the program play standby and playmodes.• When the button is pressed during the program play standbyor play mode, the program play mode is cleared.!3 Select knob• Turn this knob to select the next track to be played.• Turn the knob clockwise by one click to move one trackforward, counterclockwise by one click to move one trackbackward.• When the knob turned while pressing it in, one clickcorresponds to 10 tracks.• In the preset mode, use this knob to set and enter presetsetting.• When setting programs, use this knob to select, enter andcheck the program.• In the cue point direct search mode, use this knob to selectthe cue point.!4 PROGRAM IN button• Press this button to set the program input mode.• The button will not function during the play mode.• The button flashes when in the program input mode.• The button lights when a program is set.!5 NAME/CAPS button• When this button is pressed, the character display switchesbetween the disc name, track name and date, in that order.• The date is only displayed when the date display is preset.(Refer to Page 43.)• When the button is pressed while editing names, theselected characters switch between capital letters, smallletters, numbers and symbols, in that order.!6 TIME button• Press this button to switch the time display between theremaining time (REMAIN) and the elapsed time (ELAPSED).!7 PITCH buttonwww.sxsevents.co.uk• Press this button to switch to the play speed set with the +and – buttons.• The button lights when the pitch play mode is set.• Press the button again to cancel the pitch play mode andreturn to the normal speed.ENGLISH9
ENGLISHvent production and Audio-Visual Services!8courtesy PLAY MODE buttonPhone: of 0870 @9 080 COMBINE 2342button• When this button is pressed, the play mode switches.• Press this button in the edit mode to set the combine mode(to combine tracks).!9 END MON button•www.sxsevents.co.ukemail: enquiries@sxsevents.co.ukWhen the button is pressed again after checking the tracks,• Press this button in the standby mode to monitor the end ofthe tracks are combined and the combine mode is canceled.the track. (End Monitor)• The button lights when the end monitor mode is set. #0 CUE WRITE button• Press this button during the standby, pause, play, or manual@0 REPEAT buttonsearch. When the edit mode and recording mode to record a• Press this button to set the repeat mode.cue signal.• The button lights when the repeat mode is set.• Press the button again to cancel the repeat mode. #1 DIVIDE button@1 MOVE button• Press this button in the edit mode to set the move mode (tomove tracks).• When this button is pressed again in the move mode afterselecting the number to which the track is to be moved, thetrack is moved.@2 ERASE button• Press this button in the edit mode to set the erase mode (toerase discs, tracks, cue points or A-B sections.)• When this button is pressed again after selecting the item tobe erased, “*** OK?” appears on the display. Press thebutton again to erase the selected item.@3 EDIT button• Press this button to set the edit mode.• The button lights when the edit mode is set.• When the button is pressed during the edit mode, the editmode is canceled.@4 + button• Press this button once to increase the pitch by 0.1%.• Hold the button in to increase the pitch continuously.• Press the button in the program editing mode to set theprogram insert mode.• Press this button in the edit mode to set the divide mode (todivide a track in two)• When the button is pressed again after checking the dividepoint, the track is divided and the divide mode is canceled.#2 TITLE IN button• Press this button during the standby, pause, play, manualsearch or recording mode to set the name input (edit) mode.• The TITLE IN and EDIT buttons light when the name inputmode is set.• When the button is pressed after inputting the name, thename is input and the name input mode is canceled.#3 TOC WRITE button• Press this button while “UTOC Write” is lit after editing,inputting names or recording cue signals to write the newdata in the UTOC.#4 SEARCH dial (inner side)• Turn this dial to set the manual search mode.• Turn the dial clockwise to move the playback positionforward, counterclockwise to move the playback positionbackward.• One click corresponds to one frame of movement. Theplayback position can be moved anywhere between thebeginning of the first track and the end of the last track.@5 – button• Press this button once to decrease the pitch by 0.1%.• Hold the button in to decrease the pitch continuously.• Press the button in the program editing mode to clear theprogram.@6 B button• Use this button when setting A-B playback, A-B erase or theinsert function.• Press this button when no B point is set to set the B point.• The button lights when the B point is set.• When pressed while the B point is set, the B point issearched for and the standby mode is set.• When the button is pressed during manual search while theB point is set, the B point changes.@7 A button• Use this button when setting A-B playback, A-B erase or theinsert function.• Press this button when no A point is set to set the A point.• The button lights when the A point is set.• When pressed while the A point is set, the A point issearched for and the standby mode is set.• When the button is pressed during manual search while theA point is set, the A point changes.#5 SCAN dial (outer side)• Turn this dial to set the manual search (fast forward or fastreverse) mode.• Turn the dial clockwise to move the playback positionforward, counterclockwise to move the playback positionbackward.• The speed changes according to the angle at which the dial isturned.#6 INPUT LEVEL L (MONO)/R controls• Use this to adjust the level of the analog input signal.#7 INPUT ANALOG/DIGITAL switch• Set this to ANALOG to record analog input signals, DIGITALto record digital input signals.#8 KEYBOARD connector• To use a keyboard, connect it to this connector.• The connector is a mini DIN type 6-pin connector.#9 INPUT UNBALANCED/BALANCED switch• Set this to UNBALANCED to record the input signalconnected to the UNBALANCED jack, to BALANCED torecord the input signal connected to the BALANCED jack.10@8 INSERT button• Press this button in the edit mode to set the insert mode (toinsert any section).• When the button is pressed again after setting the A and Bpoints, “Insert PT ?” appears on the display.www.sxsevents.co.uk
Page 1 and 2: Event courtesy production Phone: of
Page 3 and 4: nt production courtesy Phone: SAFET
Page 5 and 6: ENGLISH DEUTSCH FRANCAIS ESPAÑOLve
Page 7: ENGLISHvent courtesy production Pho
Page 11 and 12: ENGLISHvent courtesy production Pho
Page 13 and 14: ENGLISHvent 4courtesy production BA
Page 17 and 18: IENGLISHvent 5courtesy production H
Page 25 and 26: IIENGLISHvent courtesy production P
Page 27 and 28: ENGLISHvent 7courtesy production ED
Page 33 and 34: PAUSELEVEL STARTRECPRESETPROG. PLAY
Page 35 and 36: PAUSELEVEL STARTRECPRESETPROG. PLAY
Page 37 and 38: POWER¢ ONMIN£ OFFLEVELPHONESMAXST
Page 39 and 40: ENGLISHvent 9courtesy production PR
Page 41 and 42: ENGLISH(3) Detailed Description of
Page 43 and 44: ENGLISHvent 10courtesy production H
Page 45 and 46: ENGLISHvent 13courtesy production S

Sound - Denon-DN-M1050R-manual - SXS Events

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?