Sound - Denon-DN-M1050R-manual - SXS Events

(13) Error Messagesvent courtesy production Phone: of and 0870 Audio-Visual 080 2342ServicesMessages appear if editing could not be completely normally. The meanings of the messages are described below.www.sxsevents.co.ukemail: enquiries@sxsevents.co.ukMessageDescriptionDisc’s tab is set to record disable position.Pre-mastered disc (disc on which recording is not possible) is loaded.Point to be erased unclear (cue erase operation).There are already 5 cue points (cue write operation).There is no space for names and cue data cannot be written (cue write operation).There is already a cue signal at this position (cue write operation).Dividing is not possible because the disc already contains 255 tracks.Dividing is not possible because you are at the beginning of the track.Dividing is not possible because the track is protected.Dividing is not possible because cue signals are set on that track.After dividing, the track name could not be given to the second track. (Dividing is completed)Dividing is not possible due to MD limitations.Combining is not possible because you are at track 1.Combining is not possible because the track is protected.Combining is not possible because cue signals are set on that track.Combining is not possible because the first track is protected.Combining is not possible because the track mode is different for the first and second tracks.Combining is not possible because cue signals are set for the first track.Combining is not possible due to MD limitations.Moving the same track is not possible.No more titles can be added because the maximum number of charcters has already been reached.No A or B point (A-B insert operation).A and B points are the same (A-B insert operation).A point is the beginning of the track (A-B insert operation).B point is the end of the track (A-B insert operation).Inserting is not possible because there are already 253 tracks.Inserting is not possible because the insert point is between the A and B points.Inserting is not possible because the track at the insert point is protected.Inserting is not possible because the insert point is the beginning of a track.Inserting is not possible because the insert point is the end of a track.Inserting is not possible because there is a cue signal at the insert point.Inserting is not possible because the track at the A point is protected.Inserting is not possible because there is a cue signal at the A point.Inserting is not possible because the track at the B point is protected.Inserting is not possible because there is a cue signal at the B point.A-B insert is not possible due to MD limitations.Erasing is not possible because the A and B points are the same (A-B erase operation). (When both the A and B points are set)Erasing is not possible because there are already 254 tracks (A-B erase operation). (When both the A and B points are set)Erasing is not possible because there are already 255 tracks (A-B erase operation). (When only the A or B point is set)Erasing is not possible because the track at the A point is protected (A-B erase operation).Erasing is not possible because there is a cue signal at the A point (A-B erase operation).Erasing is not possible because the track at the B point is protected (A-B erase operation).Erasing is not possible because there is a cue signal at the B point (A-B erase operation).Erasing is not possible due to MD limitations.No undo data.No redo data.No first data.ENGLISHwww.sxsevents.co.uk37