Sound - Denon-DN-M1050R-manual - SXS Events

PAUSELEVEL STARTRECPRESETPROG. PLAYON/OFFEJECTPROGRAMINPUSH ENTER8 9TIMENAME/CAPSPLAY MODEPITCHIIIEND MONREPEATABMOVE ERASE EDITCOMBINEDIVIDETOC WRITEINSERT CUE WRITE TITLE INSEARCHIII6 7 SCAN•INPUTANALOG DIGITALUNBALANCEDINPUT LEVELKEYBOARDLMONORBALANCEDPAUSELEVEL STARTRECPRESETPROG. PLAYON/OFFEJECTPROGRAMINPUSH ENTER8 9TIMENAME/CAPSPLAY MODEPITCHIIIEND MONREPEATABMOVE ERASE EDITCOMBINEDIVIDETOC WRITEINSERT CUE WRITE TITLE INSEARCHIII6 7 SCAN•INPUTANALOG DIGITALUNBALANCEDINPUT LEVELKEYBOARDLMONORBALANCEDENGLISHvent courtesy production 2 Phone: of and 0870 Audio-Visual 080 2342 1 ServicesN-M1050Rwww.sxsevents.co.ukemail: enquiries@sxsevents.co.ukN-M1050R55§§••3 42-1,2-2(11) Undoing Editing ‹Undo functions›(12) Canceling the Edit Mode and Writing the UTOC1Set the stop mode.Press the STOP button.Set the undo mode.Press the EDIT button and hold it in for about 3 seconds.Cancel the edit mode.Press the EDIT button.EDIT EDIT EDITEDITEDITLitOffTRACK NO. SINGLE REMAIN NEXT NO.m s f2LitTRACK NO. SINGLE REMAIN NEXT NO.m s fTOCEDITLit1DISC NAMEWhen the “UTOC Auto” mode is set, the UTOC isautomatically written on the disc and the edit mode iscanceled. (“UTOC Auto” mode : Refer to Page 42)flashes while the UTOC is beingwritten.Keep pressing the button untilis displayed.EDIT EDIT EDITSelect the undo mode.Turn the select knob.LitTRACK NO. SINGLE REMAIN NEXT NO.OffDISC NAMEm s fTOC3When the “UTOC Manual” mode is set, the edit mode iscanceled and the UTOC is not written on the disc.(“UTOC Manual” mode : Refer to Page 42)UNDO: For undoing the last editing operation.REDO: For resetting the editing undone with the undofunction.FIRST: For undoing all the editing operations.Write the UTOC.Press the TOC WRITE button.TOC WRITETOC WRITEUndo the editing.Press the TITLE IN button.2-1LitTRACK NO. SINGLE REMAIN NEXT NO.TITLE INTOCEDITm s f4TOCEDITTOCLitThe editing is undone and the mode returns to the editmode.Press the TOC WRITE button again while UTOC Write? isdisplayed. (“UTOC Write?” is displayed for 5 seconds.)TOC WRITE TOC WRITE TOC WRITENOTE:• The undo operation can be used to undo up to the two lastediting operations. To undo previous editing operations, use the“First” operation to undo all the editing operations, then redothe editing.• Once the UTOC is written, it is not possible to changeprevious editings.2-2LitOffTRACK NO. SINGLE REMAIN NEXT NO.m fsTOCFlashingFlashing36NOTE:If editing is performed when a program is set, the program isdiscarded.www.sxsevents.co.ukNOTE:If the EJECT button is pressed after editing without writing theUTOC,is displayed for 5 seconds. If theEJECT button is pressed again while the message is displayed,the editing is discarded and the cartridge is ejected.