Sound - Denon-DN-M1050R-manual - SXS Events

ENGLISHvent courtesy production Phone: of and 0870 Audio-Visual 080 2342Serviceswww.sxsevents.co.ukemail: enquiries@sxsevents.co.uk(6) Dividing Tracks into Two Parts ‹Divide function› (7) Combining Two Tracks ‹Combine function›1 Load the cartridge.1 Load the cartridge.Set the edit mode.Press the EDIT button.Set the edit mode.Press the EDIT button.2Lit2LitLitLit3Use manual search, etc., to find the point at which youwant to divide the track.Set the divide mode.Press the DIVIDE button.DIVIDETRACK NO. SINGLE REMAIN NEXT NO.3Select the tracks to be combined.Use the select knob to set the standby mode at thesecond of the tracks to be combined.To combine tracks 02 and 03:m s fEDIT4* The DIVIDE button lights.The section from three seconds before the divide point tothe divide point is played repeatedly.NOTE: To move the divide point, turn the SEARCH orSCAN dial.Divide the track.Press the DIVIDE button.4Set the combine mode.Press the COMBINE button.COMBINETRACK NO. SINGLE REMAIN NEXT NO.m s fEDITDIVIDETOCEDIT* The COMBINE button lights.5TOCEDITLitCombine the tracks.Press the COMBINE button.* The DIVIDE button turns off.COMBINETOCEDITThe track is divided and the mode returns to the editmode.5TOCEDITLit32NOTE:• The divide operation cannot be performed if cue signals areset for that track.(Clear all the cue signals first.)NOTE:www.sxsevents.co.uk* The COMBINE button turns off.The tracks are combined and the mode returns to the editmode.• If the tracks have track names, the name of the second trackwill be cleared.• The following tracks cannot be combined:1) The first track with the last track2) A stereo track with a monaural track3) Tracks containing cue signals