Galileo Sol.pdf

2. Menus, settings and functionsPlease refer to section 3.7.1 for instructionson setting the oxygen concentration fortanks T2 and TD.English WARNING- Diving with Nitrox may only be attemptedby experienced divers after proper trainingfrom an internationally recognized agency.- Before every dive and after changing thetank, you must make sure that the setoxygen concentration in Galileo correspondsto the oxygen concentration in the tank.Setting the wrong oxygen concentration canlead to serious injury or death.2.3.2 Gauge mode (default: OFF)Upon entering this menu, the words ONor OFF will be highlighted on the screen,indicating whether the gauge mode isactive (ON) or inactive (OFF). If the gaugemode is inactive, Galileo will function asa dive computer. If the gauge mode isactive, Galileo does not carry out anydecompression calculation and does notprovide any warnings or alarms.2.3 Dive settingsSee section 3.8 for restrictions on settingGalileo from computer mode to gaugemode and vice versa.2.3.1 MB level (default: L0)Upon entering this menu, the currentlyactive MB level is displayed. Using the +and - buttons you can change betweenlevels, from L0 (baseline algorithm) to L5(highest level of added conservatism).2.3.3 Safety stop timer (default:automatic, 3 minutes)The purpose of the safety stop timer isto allow you to monitor your safety stopat the end of the dive. You can set theduration of the safety stop timer between1 and 5 minutes in one minute increments.You can also set the timer to be triggeredautomatically or manually or you can turnthe function OFF altogether. The operationof the safety stop timer is described insection 3.4.3.19