Galileo Sol.pdf

2. Menus, settings and functions WARNINGIf RBT drops to 3 minutes or less, you may nothave enough gas supply to complete a safeascent. Start ascending when you see thiswarning.See section 3.5 for more information on MBlevel diving.2.6.8 Pressure signal (default: BOTH)Galileo relies on RF communication withthe Smart transmitter for tank pressureinformation. Under certain circumstances,such as inappropriate positioning of thetransmitter or interference from strong RFsources, the data transmission can bemomentarily interrupted. Strobes usedin underwater photography for exampleare known to momentarily affect thecommunication between Galileo and theSmart transmitter.Galileo can warn you when the signal fromthe transmitter is disturbed:- If Galileo receives no signal from thetransmitter for 30 seconds, an audiblesequence goes off and the messageNO PRESSURE SIGNAL appears onthe display for 12 seconds.- If after another 40 seconds Galileostill has not received any signal fromthe transmitter, another audiblesequence goes off and the messagePRESSURE SIGNAL LOST appearsfor 12 seconds, after which the RBT isnot displayed any longer and the tankpressure is replaced with - - - .During the dive, when you are about toenter the level stop phase and the warningis set to either VISUAL or BOTH, Galileowill show the message ENTERING LEVELSTOPS on the display for 12 seconds. Thefollowing fi gures show the actual display inthe CLASSIC and FULL confi gurations.If Galileo was set to LIGHT, at this pointit switches to CLASSIC to fi t all theinformation.2.6.9 Entering level stops(default: OFF)When diving with a microbubble (MB) leveldifferent than L0, Galileo can warn you whenyou are no longer in the MB no stop phase.2.6.10 MB stop ignored(default: BOTH)When diving with an MB level higher thanL0 and in the presence of MB level stops,Galileo can warn you if you reach a depthshallower than the deepest required MBlevel stop, therefore allowing you to avoidmissing the required stop.30