Galileo Sol.pdf

3. Diving with Galileo- If you are breathing from TD, the RBT isfor the decompression calculation thatis actually displayed on the computerscreen.3.7.7 Logbook for dives with morethan one gas mixtureFor dives carried out with more than one gasmixture, Galileo adds a page in the logbookfor each gas mixture. These appear justbefore the page listing warnings and alarms.Each page shows oxygen concentration,starting pressure, end pressure, consumedpressure and, for T2 and TD only, depth atwhich the switch took place.only switch to gauge mode if the computeris completely desaturated. All audible andvisual alarms, other than the low batteryalarm, are turned off. WARNINGDives in gauge mode are performed at yourown risk. After a dive in gauge mode you mustwait at least 48 hours before diving using adecompression computer.When on the surface in gauge mode,Galileo will show neither the remainingdesaturation time nor the CNS O 2% value.It will however display a surface interval upto 24 hours and a 48 hour no-fl y time. Thisno-fl y time is also the time during which youcannot switch back to computer mode.The surface display changes as shownbelow:3.7.8 Planning dives with more thanone gas mixtureThe dive planner considers all programmedgas mixtures when computing no-stoptimes or decompression schedules. Whenmore than one gas is set, the symbols T1,T2 (if applicable) and TD appear on the diveplanner screen.3.8 Gauge modeWhen Galileo is set to gauge mode, it willonly monitor depth, time, tank pressure,heart rate and temperature, and will notcarry out any decompression calculation.Maximum displayed dive time in gaugemode is 99 hours and 59 minutes. You canDuring a dive in gauge mode, the followinginformation is displayed:- current depth- dive time- tank pressure- stopwatch- maximum depth- temperature- heart rate- average depth66