CITY 1.24 and 2.24 GN CITY 1.24 and 2.24 B/P

1. GENERAL
1.1 Description
CITY 1.24 wall hung gas boilers are for central heating
only. They can be associated with 50, 80 or 150
litre storage tanks to produce domestic hot water.
CITY 2.24 boilers provide central heating and instantaneous
domestic hot water.
They use natural gas or butane/propane.
CITY 1.24 GN and CITY 2.24 GN boilers are factory
set for use with natural gas.
CITY 1.24 B/P and CITY 2.24 B/P boilers are factory
set for use with butane/propane.
The boiler output can be varied between 10 and 24
kW for central heating and 8 and 24 kW for domestic
hot water.
1.2 Approvals
3
These boilers are supplied in 2 packs:
- backplate pack: water, gas and drain connections
(safety valve, disconnector and domestic hot water
pot bleeder on the 2.24 model).
- boiler pack.
Note:
An extended height backplate must be used for boilers
associated with an 80 litre tank.
Boiler 2.24 GN 2.24 B/P 1.24 GN 1.24 B/P
CE No. CE-0085 AT 0282
Category II 2E+ 3+
Type B11 BS
Combustion product removal Flue liner
Ignition Automatic
Gas Natural gas Butane/Propane Natural gas Butane/Propane
CITY boilers conform to the following European directives
and standards:
90/396 EEC Gas appliance directives
Applicable standards: EN 297 and EN 625.
73/23 EEC Low voltage directives
Applicable standards: EN 60.335.1
89/336 EEC EMC directives
Applicable standards: EN 50.081.1/
EN 50.082.1./EN 55.014
92/42 EEC Efficiency directives
★★ CE