KM-1530 Instruction Handbook - KYOCERA Document Solutions

CHAPTER 4 BASIC OPERATIONS4-5Interrupt copying is useful if, during one copy job, other originals needto be copied at different settings. The interrupted job can be resumedat the same settings as before, after the rush job is finished.4When copying ends, press the Interrupt key again andreplace the newly copied original(s) with the one(s) removedbefore. Then, press the Start key. The interrupted copy jobwill be resumed.Approximately 120 seconds after the end of interruptcopying, the auto clear function will be triggered. TheInterrupt indicator goes out and the copier will be ready toresume the interrupted copy job.1Press the Interrupt key. When interrupt copying is enabled,the Interrupt indicator lights.23Remove the present original(s) and put it aside.Set the new original(s) and execute copying.