ncr/doc/Old Models/Technical Manuals/7453_... - Alsys Data
ncr/doc/Old Models/Technical Manuals/7453_... - Alsys Data
ncr/doc/Old Models/Technical Manuals/7453_... - Alsys Data
- No tags were found...
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Chapter 4: Hardware Service 4-69An 8-pin MicroFIT connector provides 5V, 12V and -12V auxiliarypower from the workstation, and a 6-pin MicroFIT connector provides24V-printer power. Their pin assignments are shown below.F1, 3A SB, 120V(+24V)Cash DrawerInput ConnectorPower(J6)F4, 5A, 120V(+5V)F2, 5A, 120V(+12V)F3, 5A, 120V(-12V)75AU PowerConnectorGnd-12VGnd-12V863 +5V +5V 41 GndFrameGnd253Printer PowerConnectorFrameGnd+24VGnd+24V641 Gnd Gnd 2123456Cash DrawerKick-outConnectorGndDrawer ASwitch+24VDrawer BGnd16314A maximum of 1A @ 5V, and 1A @ 12V can be drawn from eitherauxiliary power connector. There is also a maximum total current thatcan be drawn from both connectors combined. The 5V and 12Vauxiliary power outputs can deliver 3A of total combined current.Example: 1A @ 5V and 2A @ 12V, or 3A @ 5V and 0A @ 12V, etc.They are specified in this manner because most peripherals draw about1A from either 5V or 12V, but not both.