12.07.2015 Views

ncr/doc/Old Models/Technical Manuals/7453_... - Alsys Data

ncr/doc/Old Models/Technical Manuals/7453_... - Alsys Data

ncr/doc/Old Models/Technical Manuals/7453_... - Alsys Data

SHOW MORE
SHOW LESS
  • No tags were found...

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

Chapter 4: Hardware Service 4-11Removing the Power SupplyNote: Before attempting to remove the Power Supply, always removethe UPS Battery Assembly and the Drive Assembly first. If anexternal battery is attached to the terminal, then the P7 cable willhave to be disconnected from the sheet metal in the back of theworkstation.1. Remove the screws (3) from the Back Panel.External Battery Knock-outRemove Screws (3)15127c

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!