ncr/doc/Old Models/Technical Manuals/7453_... - Alsys Data

4-32 Chapter 4: Hardware ServiceInstalling the SIMMsTo install the SIMMs:1. Remove the Cover.2. Remove the Internal UPS Battery Assembly, if installed.3. Refer to the "Memory SIMM Configuration" table (above), andselect the configuration of SIMMs appropriate to yourconfiguration.4. Install each SIMM:a. Hold the SIMM at an angle in the socketb. Push on both ends of the SIMM simultaneously to raise it to avertical position in the Motherboard, making sure that thelatches on the socket engage the side edges of the SIMM.146665. Replace the Cover.