12.07.2015 Views

ncr/doc/Old Models/Technical Manuals/7453_... - Alsys Data

ncr/doc/Old Models/Technical Manuals/7453_... - Alsys Data

ncr/doc/Old Models/Technical Manuals/7453_... - Alsys Data

SHOW MORE
SHOW LESS
  • No tags were found...

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

4-30 Chapter 4: Hardware Service586 Processor BoardMemory (SIMMs)SIMM1SIMM2SIMM3SIMM4Tree Card ConnectorSW1RS232/1RS232/2LANKeyboardRS232/3LCDLithium BatterySW2ProcessorVGA15216SW1 BlockSwitches, not shunts, are used on the 586 main processor board. Thestrapping for the SW1 block on the board is as follows:ROM Base AddressSwitch positions 1, 2, and 3 are used to set the ROM Base Address forthe Memory Dump ROM.Base Address Switch Pos. 1 Switch Pos. 2 Switch Pos. 3C8000 On On OnCC000 On On Off (Default)D0000 On Off OnD4xxx On Off OffD8000 Off On OnDisable Off Off On

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!