Installation Manual - ICT

More documents

Recommendations

Info

The specifications and descriptions of products and services contained in this document were correct at thetime of printing. Integrated Control Technology Limited reserves the right to change specifications or withdrawproducts without notice. No part of this document may be reproduced, photocopied, or transmitted in any formor by any means (electronic or mechanical), for any purpose, without the express written permission ofIntegrated Control Technology Limited. Designed and manufactured by Integrated Control Technology Limited.Protege® and the Protege® Logo are registered trademarks of Integrated Control Technology Limited. All otherbrand or product names are trademarks or registered trademarks of their respective holders.Copyright © Integrated Control Technology Limited 2003-2013. All rights reserved.Publication Date: March 20132 PRT-CTRL-SE Protege SE Integrated System Controller Installation Manual | March 2013
Contents1 Introduction _______________________________________________________________ 51.1 Document Conventions ................................................................................................. 52 Installation Requirements ___________________________________________________ 63 Mounting _________________________________________________________________ 73.1 UL/ULC Installation Cabinet Options ............................................................................ 84 Connections ______________________________________________________________ 94.1 Protege SE Integrated System Controller Connection .................................................. 94.2 Wiring .......................................................................................................................... 104.3 Cabinet Enclosure Tamper Switch .............................................................................. 104.4 Earth Ground Connection ............................................................................................ 104.5 AC Power .................................................................................................................... 114.6 Battery Backup ............................................................................................................ 124.7 Battery Charge Current Setting ................................................................................... 134.8 Status Indicator ........................................................................................................... 134.9 Encrypted Module Network ......................................................................................... 144.10 Telephone Dialer .......................................................................................................... 164.11 Expansion Connector .................................................................................................. 164.12 Ethernet 10/100 Network Interface ............................................................................. 175 Door Access Control ______________________________________________________ 195.1 Card Reader Connection ............................................................................................. 195.2 Multiple Wiegand Card Reader Connection ................................................................ 205.3 Door Contact Connection ........................................................................................... 215.4 Lock Output Connection ............................................................................................. 225.5 Programming the Onboard Reader ............................................................................. 226 Inputs ___________________________________________________________________ 246.1 Zones ........................................................................................................................... 246.2 Resistor Value Options ................................................................................................ 256.3 Trouble Zones ............................................................................................................. 267 Programmable Outputs ___________________________________________________ 277.1 Bell/Siren PGM Outputs .............................................................................................. 277.2 PGM 3/4 Outputs ........................................................................................................ 287.3 Reader PGMs .............................................................................................................. 288 Hardware Configuration ___________________________________________________ 298.1 Configuration Switch ................................................................................................... 298.2 Defaulting a Controller ................................................................................................. 30PRT-CTRL-SE Protege SE Integrated System Controller Installation Manual | March 2013 3
Page 1: PRT-CTRL-SEProtege SE Integrated Sy
Page 5 and 6: 1 IntroductionThank you for purchas
Page 7 and 8: 3 MountingThe Protege Controller is
Page 9 and 10: +-4 Connections4.1 Protege SE Integ
Page 11 and 12: 4.5 AC PowerThe Protege Controller
Page 13 and 14: 4.7 Battery Charge Current SettingT
Page 15 and 16: ULULČIf an external power supply
Page 17 and 18: Warning: Power to the Protege Syste
Page 19 and 20: 5 Door Access ControlThe Controller
Page 21 and 22: 5.3 Door Contact ConnectionThe Cont
Page 23 and 24: The default settings are shown in t
Page 25 and 26: Each zone input can use a different
Page 27 and 28: 7 Programmable OutputsThe Controlle
Page 29 and 30: 8 Hardware Configuration8.1 Configu
Page 31 and 32: 9 LED IndicatorsThe Controller incl
Page 33 and 34: 10 Mechanical DiagramThe mechanical
Page 35 and 36: 12 System CapacitiesThe Protege Con
Page 37 and 38: 13 Technical SpecificationsThe foll
Page 39 and 40: 13.2 Current and Validation Example
Page 41 and 42: 13.4 Current and Validation (UL Ins
Page 43 and 44: 14 UL and ULC Installation Requirem
Page 45 and 46: The following options must be enabl
Page 47 and 48: In the ArmorIP Internet Monitoring
Page 49 and 50: CAN/ULC-S559PRT-CTRL-SEPASSIVE COMM
Page 51 and 52: In the event of unsuccessful commun
Page 53 and 54:
15 FCC Compliance StatementsFCC PAR
Page 55 and 56:
16 Industry Canada StatementThis cl
Page 57 and 58:
18 WarrantyIntegrated Control Techn
Page 60:
227-4045-001 : UL 06 March 2013
show all

Installation Manual - ICT

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?