High & Ultrahigh Vacuum Thin Film Deposition Technology

e-Vap ®Controls and MeasurementCustomize the Pattern/Controller NameThe sweep controller has the ability to custom name each individual sweeppattern, whether pre-defined or user-defined. For example, when youchoose a specific pattern for a specific evaporation material, it may bedesirable to name the pattern after the evaporation material, such as“QuartzPattern” or “TitaniumPattern.”The sweep controller also has the ability to store a name for itself. If yourcoating machine is called “Coating Machine One,” you could customize thename of the sweep controller as, “CoatingMachine1.”The sweep controller also has the ability to assign a specific patternnumber (1 to 99) to a specific crucible number or crucible pocket. This isadvantageous for users who always have a certain evaporation material ina certain crucible pocket. This allows the user to have saved custom sweepand beam parameters for a given crucible pocket. This is beneficial sincemost deposition controllers have the ability to invoke crucible pocketsduring a coating cycle.Optical Coating Uniformity SolutionsHandheld PS/2 Mouse/TrackballRotary Pocket Evaporation Source with HF Emitter Assembly0Thin Film Deposition6030306090 901.0 0.8 0.6 0.4 0.2 0.0 0.2 0.4 0.6 0.8 1.0Maximize coating distribution with optimal sweep patternsThe XY Programmable Sweep Controller comes equipped witha handheld PS/2 mouse/trackball which allows activation, and XYoffsets and sweep amplitude adjustments from up to 6 feet away.• Sweep On/Off – click the left mouse button• DC On/Off – click the right mouse button• Edit XY Offset – roll the trackball in the desired direction• Edit Amplitude – highlight amplitude, roll the trackball up or down.Ordering InformationHidden Filament Emitter AssemblyDESCRIPTIONREFERENCEPARTNUMBERPRICE$XY PROGRAMMABLE SWEEP CONTROLLERHALF RACK SPACERXYS2-CEEV-HRS991344991062440012532 Phone 800-443-8817 www.mdcvacuum.com MDC Vacuum Products Corporation