Rosemount 3051S Electronic Remote Sensors - Emerson Process ...

More documents

Recommendations

Info

Rosemount 3051S ERS System INSTALLATION PROCEDURES 2-6 Reference Manual 00809-0100-4804, Rev AA January 2011 Identify ERS Sensors A complete ERS system contains two pressure sensors. One is mounted on the high-pressure (P HI ) process connection, and the other is mounted on the low-pressure (P LO ) process connection. An optional remote display and interface may also be included if ordered. Figure 2-3. ERS P HI and P LO Wire-On Tags 1. Look at the wire-on tag on the ERS sensor to identify whether it is configured as the PHI or PLO sensor (see Figure 2-3) 2. Locate the second sensor that will be used in the ERS System: • For new installations or applications, the second ERS sensor may have been shipped in a separate box. • If servicing or replacing part of an existing ERS system, the other sensor may already be installed. NOTE: ERS sensors are shipped from the factory preconfigured such that the primary unit (4-20 loop termination and optional LCD) is assigned as the P HI device, and the secondary unit (junction box housing) is assigned as the P LO device. The P HI and P LO process connection (such as at the top of a tank), these designations may be switched electronically using a Field communicator (page 3-12). OR
Reference Manual 00809-0100-4804, Rev AA January 2011 Rosemount 3051S ERS System Mount Each ERS Sensor Mount the P HI and P LO sensors at the correct process connections for the application. Common ERS installations are shown in Figure 2-4. Figure 2-4. Vertical and Horizontal ERS Installations P LO Sensor P HI Sensor Vertical Installation In a vertical installation such as on a vessel or distillation column, the PHI sensor should be installed at the bottom process connection. The PLO sensor should be installed at the top process connection. Horizontal Installation In a horizontal installation, the PHI sensor should be installed at the upstream process connection. The PLO sensor should be installed downstream. P HI Sensor P LO Sensor Pressure Drop 2-7
Page 1: Reference Manual 00809-0100-4804, R
Page 5 and 6: Reference Manual 00809-0100-4804, R
Page 13: Reference Manual 00809-0100-4804, R
Page 65 and 66:
Reference Manual 00809-0100-4804, R
Page 67 and 68:
Page 69 and 70:
Page 71 and 72:
Page 73 and 74:
Page 75 and 76:
Page 77 and 78:
Page 79 and 80:
Page 81 and 82:
Page 83 and 84:
Page 85 and 86:
Page 87 and 88:
Page 89 and 90:
Page 91 and 92:
Page 93 and 94:
Page 95 and 96:
Page 97 and 98:
Page 99 and 100:
Page 101 and 102:
Page 103 and 104:
Page 105 and 106:
Page 107 and 108:
Page 109 and 110:
Page 111 and 112:
Page 114:
show all

Rosemount 3051S Electronic Remote Sensors - Emerson Process ...

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?