VS1033 - MP3/AAC/WMA/MIDI AUDIO CODEC - VLSI Solution

VLSISolution yVS1033cVS1033C10. VS1033 REGISTERS10.14 System Vector TagsThe System Vector Tags are tags that may be replaced by the user to take control over several decoderfunctions.10.14.1 AudioInt, 0x20Normally contains the following VS DSP assembly code:jmpi DAC_INT_ADDRESS,(i6)+1The user may, at will, replace the first instruction with a jmpi command to gain control over the audiointerrupt.10.14.2 SciInt, 0x21Normally contains the following VS DSP assembly code:jmpi SCI_INT_ADDRESS,(i6)+1The user may, at will, replace the instruction with a jmpi command to gain control over the SCI interrupt.10.14.3 DataInt, 0x22Normally contains the following VS DSP assembly code:jmpi SDI_INT_ADDRESS,(i6)+1The user may, at will, replace the instruction with a jmpi command to gain control over the SDI interrupt.10.14.4 ModuInt, 0x23Normally contains the following VS DSP assembly code:jmpi MODU_INT_ADDRESS,(i6)+1The user may, at will, replace the instruction with a jmpi command to gain control over the AD Modulatorinterrupt.Version 1.00, 2008-02-01 71